Pioneer HTZ-55DV Picture disturbance during playback or dark, Remote control doesnt seem to work

Page 65

Picture disturbance during playback or dark.

•This player is compatible with Macro-Vision System copy guard. Some discs include a copy prevention signal, and when this type of disc is played back, stripes etc., may appear on some sections of the picture depending on the TV.

This is not a malfunction.

•Different discs respond in different ways to some functions.This may result in the screen becoming black for a brief instant or shaking slightly when the function is executed.

These problems are largely due to differences between discs and disc content and are not malfunctions of this system.

When recorded on a VCR or passed through an AV selector, there is disturbance in the play- back picture.

•Due to copy protection, connection of this system through a VCR or an AV selector may prevent recording or cause picture problems.

This is not a malfunction.

The remote control doesn't seem to work.

•The remote control is too far from the system, or the angle with the remote sensor is too wide.

Use the remote within its operating range (See the separate Setting Up guide).

• The batteries are exhausted.

Put in new batteries (See the separate Setting Up guide).

No 96kHz signal from the digital audio output

•Linear PCM Out is set to 96kHz348kHz. Set to 96kHz.

•As a copy-protection measure, some DVDs do not output 96kHz audio.

In this case, even if 96kHz is selected, the player automatically outputs the audio at 48 kHz. This is not a malfunction.

13 Additional Information

No audio, or audio is distorted.

•Dirt, dust, etc. on the disc. Clean the disc (page 57).

•Interconnects are not fully inserted into the terminals (or are not connected).

Check that all interconnects are firmly inserted.

•Dirty or oxidized plugs/terminals.

Clean the plugs/terminals.

• Incorrect audio cable connection.

Check the audio connections (See the separate Setting Up guide).

• The disc is paused.

Press 3or 8to exit the pause mode.

• Incorrect settings.

Check that the volume is turned up, that the speakers are on, the input function set correctly, etc.

• Mute is on.

Press mute (remote control only) to switch mute off.

Noticeable difference in DVD and CD volume.

•DVDs and CDs use different recording methods. This is not a malfunction.

65

En

Page 64 Page 66
Image 65
Page 64 Page 66
Contents HTZ-55DV Risk of Electric Shock Do not Open Information to UserMains voltages in Saudi Arabia are 127 V and 220 V only Line Voltage Selector SwitchInstallation Precautions Contents Using this manual FeaturesConnecting Up New graphical Setup NavigatorDiscs compatible with this system Hints on installation20 19 18 17 16 15 Standby / on Press to switch the system on or into standbyDisc tray Remote control Enter Use to confirm menu choices, setups and so on Switching the time format Switching on and setting the clockIntroduction TipSetting the speaker distances Setting up for surround soundPress SYS, then Setup This puts the remote into surround setup modePress SYS then 2/DTS When youre done, press Test Tone to turn off the test toneBalancing the surround sound Using the setup navigator Press DVD Playing DVD Video discsLoad a DVD disc Basic playback controlsControl Basic disc menu controlsLoad a CD Eject and remove the disc before switching offPlaying CDs Basic PBC menu controls Playing Video CDsLoad a Video CD Improving FM stereo sound Listening to the radioListening to other components Switching between digital and analog sourcesUsing P.Bass Adjusting the bass and treble¥ Press SYS then P.BASS to switch P.BASS on or off You can see the current level in the displayEffects modes Press SYS then 2/DTS to select a sound modePress SYS then DSP to select a sound mode Listening at low volumeWhen youre done, press HallPress 3 to start/restart playback Finding what you want on a discTime search DVD and Video CD only Switching subtitles Switching camera angles DVD onlySwitching audio language DVD only Programming playlistsPlayer can memorize playlists for up to 24 DVD discs Programming a DVD playlistProgramming a CD/Video CD playlist More programming optionsPress Shift then PGM Start entering track numbersUsing random play Using repeat play¥ To cancel looping, press AÐB again CD/Video CDScreen Memorizing disc settings DVD onlyBookmarking a place in a disc Displaying disc information Listening to station presets Saving station presetsUsing the wake up timer Checking the timer settings Using the sleep timerDisplay shows the timer settings On time Off time Function DVD, etc VolumeSelect a source to record Making an audio or a video recordingPrepare the program source Select DVD or Video V-2 as the digital source to recordOSD settings Using the Setup menuSetup Menu Mode OSD languageAdjusting the video quality Video settingsAngle Indicator Expert TV Screen SizeLanguage settings Audio settingsDolby Digital Out Linear PCM OutAuto Language Default Setting OnSubtitle Language Default Setting Selected Subtitle Default Setting w/Subtitle LanguageDVD Language Expert Subtitle Off ExpertChanging the parental lock level Miscellaneous settingsParental Lock Select Password Change Changing your passwordInput your existing password, then press Input a new password, then press EnterC. Medium mid setting Advanced sound settingsLFE attenuator Dynamic Range ControlAdvanced Sound Dual-mono settingSetting up using component presets Setting up the remote controlSwitch on the component you are setting up this remote for Press and hold Remote Setup for three secondsLED at the top of the remote will blink twice Reassigning a Multi Control buttonPress the Multi Control button which you want to change You can reassign these buttons Above example, pressProgram commands for other components as required Learning directly from other remote controlsUsing the number buttons, enter Deleting all commands for a component Deleting a single commandPress twice the command button you want to delete Controlling a component while playing anotherChecking preset codes Clearing all remote control settingsLED at top of the remote blinks twice LED at top of the remote will blink twiceCD/MD/CD-R/VCR/LD player controls Press to start playback Press to stop playback Cassette deck controlsFor deck two or any tape deck that can record For deck one of a dual tape deck13 E/CH+ DVD/DVR player controls2/3/ENTER ReturnDTV controls Cable TV/satellite TV/TV controls Press to switch the TV or Catv between standby and onPress to display or close the TV or Catv menu Press to display information on cable TVPlaying your TV through this system Connecting to a TV with an S-Video cordWatching TV Connect to Audio 1 in or Audio 2Connecting an audio recorder Connecting Other ComponentsConnecting an outdoor AM Antenna Connecting outdoor antennasConnecting an outdoor FM Antenna Connect as shown in the figure below¥ Press SYS then FL Dimmer Setting the display brightnessSwitching the TV system output Discs to avoid Disc lens cleanerStoring discs Collection of chapters on a DVD disc. See also Chapter GlossaryLanguage DVD language code listDVD PLAYER/RECORDER Preset Code ListTelevision 3/4 CD Player 1/2 VCR 2/4 Manufacturer Code Troubleshooting No audio, or audio is distorted Remote control doesnt seem to workPicture disturbance during playback or dark Auto tuning does not pick up some stations Resetting the systemScreen sizes and disc formats Noisy radio receptionDisplay Unit Component features & functionsSpecifications

HTZ-55DV specifications

The Pioneer HTZ-55DV is a comprehensive home theater system designed to elevate your audio-visual experience. This system integrates various technologies and features that cater to cinema enthusiasts and casual viewers alike, providing an immersive environment for enjoying movies, music, and games.

One of the standout features of the HTZ-55DV is its support for high-definition audio formats. With built-in Dolby Digital and DTS surround sound decoding capabilities, it can deliver rich, multi-dimensional soundscapes that place you at the center of the action. This creates an engaging listening experience that draws you into your favorite films or music tracks.

The system is equipped with a powerful amplifier and satellite speakers that work together to produce clear and dynamic audio. The subwoofer enhances the low-frequency response, ensuring that you feel the rumble of explosions or the depth of musical bass lines. The compact and stylish design of the satellite speakers allows them to blend seamlessly into any living space without compromising on audio quality.

Another significant aspect of the HTZ-55DV is its connectivity options. It features multiple HDMI inputs, allowing users to connect several devices, such as Blu-ray players, gaming consoles, and streaming devices, all through a single HDMI output to the TV. The inclusion of an USB port provides additional convenience, letting you play music directly from flash drives or external storage. Furthermore, the system supports various disc formats, including DVD and CD, ensuring versatility in media playback.

The HTZ-55DV also includes user-friendly features such as a graphical user interface and remote control, making it easy to navigate through different settings and options. The system’s setup process is straightforward, empowering users to create their ideal home theater environment without requiring extensive technical knowledge.

In terms of design, the Pioneer HTZ-55DV combines sleek aesthetics with practical functionality, making it an attractive addition to any room. Its compact form factor allows for easy placement in smaller spaces while still producing a robust audio output that belies its size.

Overall, the Pioneer HTZ-55DV stands out as a high-performance home theater system that offers a blend of advanced technologies, user-friendly features, and stylish design. Whether you are watching the latest blockbuster or enjoying your favorite music, this system delivers an exceptional audio-visual experience that enhances your entertainment enjoyment.
Top Page Image Contents