5 Using Sound Modes and Effects 使用音場模式和效果
Playing other stereo sources with DSP effects
You can add room effects to audio CDs and other stereo sources using the DSP modes. Different effects work better with different kinds of music, so don’t be afraid to experiment a little.
•The DSP effects cannot be used with
•When playing stereo sources with DSP effects switched off, there is no sound from the surround and center speakers.
1 Press DSP repeatedly to select a sound mode.
The display shows the current DSP mode.
•HALL1
Large,
•HALL2
Large, stone-walled concert hall sound.
使 使用DSP效果播放其他立體聲音源
您可以使用DSP模式為CD等立體聲音源添加室內效 果。不同類型的音樂理應採用不同類型的效果,因 此請不要怕麻煩,略作一些嘗試。
注意
÷DSP效果不能用於96kHz/24位元音源或與環繞聲 模式結合使用。
÷在DSP效果關閉的情況下播放立體聲音源時,環 繞聲和中置揚聲器將不會發出聲音。
1 反復按 DSP,選擇聲音模式。
顯示屏顯示當前的DSP模式。
÷HALL1
大型木板牆音樂廳音場。
÷HALL2
大型石牆音樂廳音場。
÷JAZZ
爵士樂俱樂部現場音場。
•JAZZ
Live jazz club sound.
•DANCE
Nightclub sound.
•THEATER1
Classic,
•THEATER2
Large, modern movie theater sound.
•SIMUL.STEREO
Virtual stereo for mono sources.
2If necessary, adjust the effect level.
• Select EFFECT from the Sound menu and adjust using the 5 and ∞ buttons. Press ENTER to set the level.
EFFECT 7O
You can adjust the effect level in the range of 10 to 90 in steps of 10.
÷DANCE
夜總會音場。
÷THEATER1
古典中型影院音場。
÷THEATER2
大型現代影院音場。
÷SIMUL.STEREO
單聲道音源虛擬立體聲。
2根據需要,調節音場效果音平。
÷ 從 Sound 選單選擇EFFECT,用 5 和 ∞ 按鈕 進行調節。按 ENTER 設定音平。
EFFECT 7O
您可以在10至90的範圍內調節音場效果的音平,調 節幅度為10。
40
En/ChH