9 | Advanced Sound Settings | 高級音聲設置 |
Adjusting channel volume levels
Depending on your room and where you’re sitting, you may want to adjust the relative volumes of one or more speakers for a more balanced sound. You can do this in any mode, including the surround, DSP, and stereo modes.
•Each DSP effect has its own set of channel level settings.
•The channel levels you set for the surround mode apply to all Advanced Theater effects.
•The headphone level is not affected by the channel level settings.
1 Press CH LEVEL.
Adjustments to the channel volume levels will affect only the current sound mode.
2Use the 2 and 3 buttons to select a channel to adjust.
Lch OdB
The display shows the channel and its current setting.
•Remember that not all channels are available in all sound modes.
3Use the 5 and ∞ buttons to adjust the volume of the current channel.
Lch OdB
Lch + 3dB
For best results, sit in your main listening position when doing this. You can adjust each speaker in the range of
4When you're done, press ENTER.
• If you don’t press ENTER, channel level setting is exited anyway after about 20 seconds.
64
調整聲道的音量級
您也許希望根據室內環境和聽音位置來調整一個 或多個揚聲器的相對音量,以獲得更加平衡的聲 音。您可以在任何模式下(包括環繞聲,DSP和立 體聲模式)進行此項操作。
注意
÷各種DSP效果對聲道都有各自的音量級設置。
÷您為環繞聲模式設置的聲道音量適用於所有高 級影院效果。
÷耳機的音量不受聲道音量級設置的影響。
1 按CH LEVEL。
對聲道音量進行的調整僅對當前的音聲模式有 效。
2用2和3按鈕選擇要調整的聲道。
Lch OdB
顯示屏顯示該聲道及其當前設置。
÷請記住並非所有聲道在所有的音聲模式下均有 效。
3用5和∞按鈕調整當前聲道的音量。
Lch OdB
Lch + 3dB
為獲得最佳效果,作此調整時請坐在主聽音位
4操作完成後,按ENTER。
÷ 如果沒有按ENTER,則聲道音量級設置約在20
秒鐘後退出。
En/ChH