Shure MX396 manual Specifications, Output Configuration

Page 11

Specifications

Type

Condenser (electret bias)

Frequency Response

50–17000 Hz

Polar Pattern

MX396/C-DUAL: 2 x Cardioid

MX396/C-TRI: 3 x Cardioid

Output Impedance

EIA Rated at 150 Ω (170 Ω actual)

Output Configuration

Active balanced

Sensitivity (at 1 kHz , open circuit voltage) –35 dBV/Pa (18 mV)

1 Pascal=94 dB SPL

Maximum SPL (1 kHz at 1% THD, 1 kΩ load) 122 dB

Equivalent Output Noise (A-weighted)

28 dB SPL

Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz) 66 dB

Dynamic Range (1 kΩ load at 1 kHz) 94 dB

Common Mode Rejection (10 Hz to 100 kHz) 45 dB minimum

Preamplifier Output Clipping Level (1% THD)

–7 dBV (0.5 V)

Weight

Net: 0.587 kg (1.29 lbs.)

Packaged: 0.916 kg (2.02 lbs.)

Logic Connections

LED IN: Active low (≤1.0V), TTL compatible. Absolute maximum

voltage: -0.7V to 50V.

LOGIC OUT: Active low (≤1.0V), sinks up to 20mA, TTL compatible.

Absolute maximum voltage: -0.7V to 50V (up to 50V through 3kΩ).

Mute Switch Attenuation

–50 dB minimum

Cable

6.1m (20 ft) attached unterminated cable with three shielded audio pairs and three shielded conductors for logic control.

Environmental Conditions

Operating Temperature: -18–57 °C (0–135 °F)

Storage Temperature: -29–74 °C (-20–165 °F)

Relative Humidity: 0–95%

Power Requirements

MX396/C-DUAL:48–52 Vdc phantom, 10.0 mA

MX396/C-TRI:48–52 Vdc phantom, 12.0 mA

Caractéristiques

Technische Daten

Технические характеристики

仕様

Type

Électrostatique (capsule électret)

Réponse en fréquence

50–17000 Hz

Courbe de directivité

MX396/C-DUAL : 2 Cardioïde

MX396/C-TRI : 3 Cardioïde

Impédance de sortie

Nominale EIA, 150 Ω (170 Ω réelle)

Configuration de sortie

Symétrique active

Sensibilité (à 1 kHz, tension en circuit ouvert) –35 dBV/Pa (18 mV)

1 Pascal=94 dB SPL

SPL maximum (1 kHz avec DHT de 1 %, charge de 1 kΩ) 122 dB

Bruit de sortie équivalent (pondéré en A) 28 dB SPL

Rapport signal/bruit (mesuré à 94 dB SPL à 1 kHz) 66 dB

Plage dynamique (charge de 1 kΩ à 1 kHz) 94 dB

Rejet en mode commun (10 Hz à 100 kHz) 45 dB minimum

Niveau d’écrêtage de sortie du préamplificateur (DHT de 1 %) –7 dBV (0,5 V)

Poids

Net : 0,587 kg (1,29 lb)

Emballé : 0,916 kg (2,02 lb)

Connexions logiques

LED IN (ENTRÉE DEL) : Bas niveau activé (≤1,0 V), compatible TTL.

Tension maximum absolue : -0,7 V à 50 V.

LOGIC OUT (SORTIE LOGIQUE) : Bas niveau activé (≤1,0 V), chute à 20

mA, compatible TTL. Tension maximum absolue : -0,7 à 50 V (jusqu’à 50 V à 3 kΩ).

Atténuation du bouton de coupure

–50 dB minimum

Connexions logiques

Câble fixe sans terminaison de 6,1 m (20 pi) à trois paires audio blindées et trois conducteurs blindés pour la commande logique.

Atténuation du bouton de coupure

–50 dB minimum

Environnement

Température de fonctionnement : -18–57 °C (0–135 °F)

Température de stockage : -29–74 °C (-20–165 °F)

Humidité relative : 0–95 %

Alimentation

MX396/C-DUAL :48–52 V c.c. fantôme, 10,0 mA

MX396/C-TRI :48–52 V c.c. fantôme, 12,0 mA

Especificaciones

Specifiche tecniche

사양

规格

Type (Typ)

Kondensatormikrofon (Elektret)

Frequenzgang

50–17000 Hz

Richtcharakteristik

MX396/C-DUAL: 2 Niere

MX396/C-TRI: 3 Niere

Ausgangsimpedanz

EIA-Nennwert: 150 Ω (170 Ω Ist-Wert)

Ausgangskonfiguration

Aktiv symmetrisch

Empfindlichkeit (bei 1 kHz, Leerlaufspannung) –35 dBV/Pa (18 mV)

1 Pascal=94 dB Schalldruckpegel

Maximaler Schalldruckpegel (1 kHz bei 1 % Gesamtklirrfaktor, 1 kΩLast) 122 dB

Äquivalenzausgangsrauschen (mit A-Gewichtung) 28 dB Schalldruckpegel

Signalrauschabstand (bezogen auf 94 dB Schalldruckpegel bei 1 kHz) 66 dB

Dynamikbereich (1 kΩ Last bei 1 kHz) 94 dB

Gleichtaktunterdrückung (mindestens 10 Hz bis 100 kHz) 45 dB Minimum

Vorverstärkerausgang-Begrenzungspegel (1% THD)

–7 dBV (0,5 V)

Gewicht

Netto: 0,587 kg

Verpackt: 0,916 kg

Logikanschlüsse

LED EIN: Aktiver Tiefpegel (≤1,0 V), TTL-kompatibel. Absolute

Maximalspannung: -0,7 V bis 50 V.

LOGIC OUT: Aktiver Tiefpegel (≤1,0 V), sinkt auf bis zu 20 mA ab, TTL-

kompatibel. Absolute Maximalspannung: -0,7 V bis 50 V (bis zu 50 V bei bis zu 3 kΩ).

Stummschalterbedämpfung

–50 dB Minimum

Logikanschlüsse

6,1 m langes befestigtes unabgeschlossenes Kabel mit drei abgeschirmten Tonfrequenzpaaren und drei abgeschirmten Leitern für Logiksteuerung.

Stummschalterbedämpfung

–50 dB Minimum

Temperaturbereich

Betriebstemperatur: -18–57 °C

Lagerungstemperatur: -29–74 °C

Relative Feuchtigkeit: 0–95%

Versorgungsspannungen

MX396/C-DUAL:48–52 V DC Phantomspeisung, 10,0 mA

MX396/C-TRI:48–52 V DC Phantomspeisung, 12,0 mA

9

Image 11
Contents MX396 Dual & Tri-Element Microphones MX396/C-DUAL MX396/C-TRI 外部LEDコントロール用ロジック入力 CommSheildテクノロジー採用のRFフィルタリング Overviewロープロファイル、美観設計 MX396/C-DUAL & TRI Placement360º Configuration Cm 1 InstallationDIPスイッチ DIP SwitchesSettings Logic Mute Control Commande de coupure du son logiqueMic共通アース Cableスイッチアウト ロジックアースOutput Configuration SpecificationsTipo コンデンサー型(エレクトレットバイアス方式) 16 in 110 mm ゴム製分離リング Parts締め付け蝶ナット 取付けチューブTélécopie Fax

MX396 specifications

The Shure MX396 is a premium boundary microphone designed for professional audio applications, offering exceptional sound quality and versatility. This microphone is ideal for various settings, including conference rooms, auditoriums, and broadcast studios. Its compact design allows for discreet placement on surfaces, ensuring minimal visual disruption while capturing audio with clarity.

One of the primary features of the MX396 is its electret condenser capsule, which delivers outstanding audio fidelity. The microphone captures a wide frequency range, making it suitable for vocal performances, panel discussions, and presentations. Its cardioid polar pattern effectively minimizes ambient noise and focuses on the sound source, resulting in clearer audio reproduction.

The SHURE MX396 is equipped with a robust, low-profile design that blends seamlessly into any environment. It features a durable metal housing, ensuring longevity even in high-use scenarios. The microphone's sleek and unobtrusive appearance allows it to integrate well with modern interior designs, making it a preferred choice for professionals seeking both aesthetics and performance.

Another significant characteristic of the MX396 is its integrated preamplifier, which provides a clean and powerful output signal. This feature enhances the overall audio quality, allowing for greater amplification without introducing unwanted noise. The microphone also includes a sensitivity adjustment, giving users the flexibility to tailor the audio output based on their specific needs and the environment in which they are used.

The MX396 also supports various connectivity options, including XLR output, making it compatible with numerous audio systems. This adaptability ensures that users can easily integrate the microphone into existing setups without the need for additional converters or adapters.

Additionally, the microphone boasts advanced RF filtering and circuitry to reduce electromagnetic interference, ensuring optimal performance in environments with multiple electronic devices. Its low noise floor design also contributes to a cleaner sound, which is critical for capturing high-quality audio.

In conclusion, the Shure MX396 combines superior sound quality, durable construction, and versatile connectivity, making it an excellent choice for anyone in need of a reliable boundary microphone. Whether used in professional audio environments or corporate settings, the MX396 provides exceptional performance, delivering clear and accurate sound that meets the highest standards.