Crate Amplifiers FXT65 manual Front Panel

Page 4

FXT65 Guitar Amp with DSP & Channel Tracking

The Front Panel:

1

2

3

4

5

6

7

8

9

10

11

12

13

1:INPUT: Use this jack to connect your guitar to the amplifier by means of a shielded instrument cable.

OVERDRIVE CHANNEL: A high gain channel giving you sounds from a slight edge to serious overdrive.

2:GAIN 1: Use this control to adjust the amount of light distortion for the Overdrive channel. Gain 1 produces less intense distortion than Gain 2 (#3) and is active when the Gain Select switch (#5) is in the out position.

3:GAIN 2: Use this control to adjust the amount of heavy distortion for the Overdrive channel. Gain 2 produces more intense distortion than Gain 1 (#2) and is active when the Gain switch (#5) is depressed.

4:SHAPE: Use this control to “dial in” the tone for the Overdrive channel when Gain 2 is selected. Rotating the control counterclockwise enhances the mid frequencies, while rotating the control clockwise enhances the low and high frequencies. This control is only active when Gain 2 is selected.

5:GAIN SELECT: Use this switch to select which Gain control is active for the Overdrive channel. With the switch in the out position, Gain 1 is selected. When the switch is depressed, Gain 2 is selected. When a footswitch is connected to the Channel / Gain Select Footswitch jack (#21), this switch is rendered inactive and the Gain Select function is controlled by the footswitch (see #21).

6:LOW: Use this control to adjust the low frequency level of the Overdrive channel.

7:HIGH: Use this control to adjust the high frequency level of the Overdrive channel.

8:LEVEL: Use this control to adjust the output level of the Overdrive channel.

9:CHANNEL SELECT: Use this switch to select either channel. With the switch in the out position, the Clean channel is selected. When the switch is depressed, the Overdrive channel is selected. The adjacent LEDs illumi- nate to indicate which channel is active. When a footswitch is connected to the Channel / Gain Select Footswitch jack (#21), this switch is inactive and the Channel Select function is controlled by the footswitch (see #21).

CLEAN CHANNEL: A normal gain channel designed to give you crystal clear sounds to medium distortion.

10:VOL: Use this control to adjust the output level of the Clean channel.

11:LOW: Use this control to adjust the low frequency level of the Clean channel.

12:MID: Use this control to adjust the midrange frequency level of the Clean channel.

13:HIGH: Use this control to adjust the high frequency level of the Clean channel.

14:DSP LEVEL: Use this control to adjust the amount of digital effect: in its fully counter clockwise position the signal will be “dry” (without any effect). As you rotate the control clockwise the amount of effect increases.

15:DSP SELECTOR: Use this control to select one of the 16 built-in digital effects. Alisting of the effects is shown on page 3 of this user’s guide.

16:INSERT: Use this jack to connect an external effects device to the amplifier. Use a stereo 1/4” male Y con- nector: ring = send, tip = return, sleeve = ground. (Refer to the illustration at the bottom of page 5.)

17.EXTERNAL SPEAKER: Use this jack to connect the amplifier to an external speaker. This jack is wired in series with the internal speaker, which remains active even when an external speaker is connected.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents FXT65 FXT65 Guitar Amp with DSP & Channel Tracking Digital Signal Processor For the Clean channel is now saved to memoryChannel Tracking Effects are described belowFront Panel Connecting to the Insert jack Rear Panel not shownSuggested Settings System Block Diagram Output Power Rating 65W RMS @ 5% THD, 8 Ω , 120 VAC Custom Design 12, 8 Ω88dB, all controls @10 Proprietary Circuit

FXT65 specifications

The Crate Amplifiers FXT65 stands out as a versatile and powerful addition to any musician's rig. Designed with performance in mind, the FXT65 is a solid-state amplifier that provides incredible sound quality while remaining user-friendly. This amp is particularly appealing to guitarists looking for both clean and distorted sounds without sacrificing tone.

One of the most notable features of the FXT65 is its dual-channel design, which includes both clean and overdrive channels. This allows players to switch seamlessly between pristine, clear tones and rich, saturated distortion, making it perfect for various musical genres. The amplifier also comes equipped with a built-in 3-band EQ for each channel, allowing users to tailor their sound to their liking. The ability to adjust bass, mid, and treble frequencies independently for each channel ensures that every player can achieve their desired tone.

The FXT65 boasts a power output of 65 watts, making it suitable for practice sessions, small gigs, or recording in the studio. The amp features an 8-inch speaker, which delivers a balanced sound that can handle both rhythm and lead playing effectively. Additionally, its integrated reverb adds depth to the sound, making it even more versatile for different playing styles.

Portability is another key characteristic of the FXT65. Its lightweight design makes it easy to transport, whether moving from home to the studio or to a performance venue. The rugged construction ensures durability, while its classic look gives it aesthetic appeal that complements any setup.

Connectivity options are also generous, with an auxiliary input for playing along with backing tracks and a headphone output for silent practice. The FXT65 is designed to be user-friendly, making it accessible for musicians of all skill levels.

Incorporating reliable technology, Crate Amplifiers ensures that the FXT65 maintains consistent sound quality over time, making it a dependable choice for both budding musicians and seasoned pros. Whether used for practice, live performance, or recording, the FXT65 offers everything a guitarist needs to elevate their sound and creativity.
Top Page Image Contents