Pioneer VSX-D414 Minute guide, Connect your speakers, Connections before, Connecting this unit to

5 minute guide 02

3 Connect your speakers.

A complete setup of six speakers (including the subwoofer) is shown here, but everyone’s home setup will vary. Simply connect the speakers you have in the manner shown below. The receiver will work with just two stereo speakers (the front speakers in the diagram) but using at least three speakers is recommended, and all six is best. If you’re not using a subwoofer, change the front speaker setting (see Speaker setting on page 32) to large.

Make sure you connect the speaker on the right to the right terminal and the speaker on the left to the left terminal. Also make sure the positive and negative (+/–) terminals on the receiver match those on the speakers. You can use speakers with a nominal impedance of 6Ω to 16Ω (see Switching the speaker impedance on page 37 if you’re using speakers with an impedance of less than 8Ω).

Front Speakers		Center Speaker	Surround Speakers
FL	FR	C	SL	SR

R	L	R	L
SW
INPUT

	Be sure to complete all
Powered subwoofer	connections before
	connecting this unit to
	the AC power source.

9

En