Front Panel | Crate Amplifiers XT30RC specs

XT30RC Guitar Amplifier

The Front Panel:

1:INPUT: Use this jack to connect your guitar to the amplifier by means of a shielded instru- ment cable.

SOLO CHANNEL: A high gain channel designed to give you sounds from a slight edge to serious overdrive.

2:GAIN: Use this control to adjust the amount of distortion for the Solo channel.

3:SHAPE: Use this control to adjust to tone of the Solo channel.

4:LEVEL: Use this control to adjust the output level of the Solo channel.

5:SOLO/CLEAN: Use this switch to select the Solo or Clean channel. With the switch in the out position, the Clean channel is selected. When the switch is depressed, the Solo chan- nel is selected. (This switch is disabled when a footswitch is used - see #17.)

CLEAN CHANNEL: A normal gain channel designed to give you crystal clear sounds to medium distortion.

6:VOL: Use this control to adjust the output level of the Clean channel.

7:LOW: Use this control to adjust the low fre- quency level of the clean channel.

8:MID: Use this control to adjust the midrange frequency level of the clean channel.

9:HIGH: Use this control to adjust the high fre- quency level of the clean channel.

10:REV LEVEL: Use this control to adjust the level of reverb effect. The reverb can be turned on and off by using a footswitch (#17, rear panel).

11:CHORUS ON: This switch, when depressed, activates the amplifier’s built-in Chorus effect. (This switch is disabled when a footswitch is used - see #17.)

12:CHORUS DEPTH: Use this control to adjust the level of the Chorus effect.

13:CHORUS RATE: Use this control to adjust the speed of the Chorus effect.

14:CD INPUT: Use these RCA jacks to connect the output from a CD player or tape deck to the amplifier. The signal at these jacks is combined into a mono signal which is sent to the internal power amp circuit. Use the CD or tape player’s output level control to adjust the signal for the proper mix with your guitar.

15: (HEADPHONES): Use this jack to con- nect headphones to the amplifier. The internal speaker is disconnected when headphones are used.

CAUTION: To avoid possible damage to your hearing, do not use headphones for extended periods of time at extremely loud levels.

16:POWER: Use this switch to turn the ampli- fier on (top of the switch depressed) and off (bottom of the switch depressed). The switch illuminates when the amplifier is turned on.

The Rear Panel (not shown):

17:FOOTSWITCH: Use this jack to connect the 1/4” stereo plug on the cable of a two-button footswitch (such as the Crate CFP2). This allows you to remotely switch between the Clean and Solo channels and turn the Chorus effect on and off. (The front panel switches, #5 and #11, are disabled when a footswitch is turned on.)

18:EXTENSION SPEAKER: Use this jack to connect the amplifier to an external speaker cabinet. The internal speaker is disconnected when this jack is used. The minimum impedance for the extension speaker is four ohms.

19:POWER CORD: The grounded power cord should only be plugged into a grounded power out- let that meets all applicable electrical codes and is compatible with the voltage, power, and frequency requirements stated on the rear panel. Do not attempt to defeat the safety ground connection.

XT30RC specifications

Crate Amplifiers has long been synonymous with quality sound and innovative technology, and the XT30RC model exemplifies this tradition. The XT30RC is a compact yet powerful amplifier designed for musicians seeking versatility and superior tonal performance in a portable package.

At the heart of the XT30RC is its 30-watt RMS power output, allowing for robust sound projection without compromising on portability. This amp is optimized for both practice sessions and small gigs, striking a balance between power and convenience. The 10-inch speaker delivers a rich, full-bodied sound, ensuring that your guitar tones are both clear and impactful.

One of the standout features of the XT30RC is its comprehensive EQ section. Musicians can take advantage of a three-band EQ that includes controls for bass, midrange, and treble. This flexibility allows users to sculpt their tone to fit various musical styles, from smooth jazz to biting rock. In addition, the amplifier boasts a built-in reverb effect that adds depth and ambiance to your sound, enhancing the overall listening experience.

The XT30RC incorporates innovative technologies, including a custom-designed digital signal processor. This processor provides a range of effects that can be easily dialed in, allowing for an expansive array of sonic possibilities. From chorus to delay, the XT30RC comes equipped with effects that can elevate a performance or practice session.

Moreover, the XT30RC features a headphone output, making it a great choice for players needing to practice quietly while still enjoying the amp's authentic tones. This output allows musicians to connect their headphones directly to the amp, enabling silent practice without disturbing others.

Another notable characteristic is the amp’s rugged construction. Built with durability in mind, the XT30RC features a sturdy cabinet designed to withstand the rigors of both stage and studio use. This robustness ensures that performers can rely on their gear, no matter the setting.

In conclusion, the Crate Amplifiers XT30RC combines power, versatility, and advanced technology in a compact form factor. With its powerful output, customizable EQ, built-in effects, and durability, it serves as an excellent choice for musicians at any level. This amplifier isn't just about playing; it's about experiencing music in a way that inspires creativity and expression.