Crate Amplifiers GT-500H owner manual Technical Specifications

GT-500H Amplifier

TECHNICAL SPECIFICATIONS:

Output Power Rating	50W RMS @ 10% THD, 8 ohm load, 120 VAC
Input Impedance	1M ohm
Maximum Signal Accepted	2.8V peak to peak
Signal To Noise Ratio	Channel B:	52dB
	Channel A:	58dB
Gain	Channel B:	75dB
	Channel A:	68dB
Tone Control Range	Channel B:	Bass:	12dB, 60Hz
		Mid:	10dB, 600Hz
		Treble:	7dB, 4kHz
	Channel A:	Bass:	20dB, 70Hz
		Treble:	16dB, 2kHz
Line Out Level	375mV RMS @ full power output
Tube Type	Preamp: (4) 12AX7 Power Amp: (4) EL84/6BQ5
Power Requirements	120VAC, 60Hz, 110VA
	100/115VAC, 50/60Hz, 110VA
	230VAC, 50/60Hz, 110VA
Size and Weight	11”H x 21.25”W x 11.25”D, 35 lbs.

The GT-500H is covered with a durable black Tolex® material. To keep the cabinet in top condition, wipe it clean with a damp lint-free cloth to remove dirt and road film. Never spray cleaning agents directly onto the cabinet, and stay away from abrasive cleansers which could damage the finish.

Crate continually develops new products, as well as improves existing ones.

For this reason, the specifications and information in this publication

are subject to change without notice.

©1998 SLM ELECTRONICS • A division of St. Louis Music • 1400 Ferguson Avenue • St. Louis, Mo 63133

P/N 47-547-12 • 02/98