Reference
Specifications
nAMPLIFIER SECTION
FTC output power both channels driven 10 % total harmonic distortion
60 Hz to 3 kHz | (Low channel) 35 W per channel (6 Ω) |
3 kHz to 16 kHz | (High channel) 35 W per channel (6 Ω) |
Total | 70 W per channel |
RMS output power both channels driven | |
10 % total harmonic distortion | |
1 kHz | (Low channel) 40 W per channel (6 Ω) |
8 kHz | (High channel) 40 W per channel (6 Ω) |
Total | 80 W per channel |
Output impedance | 16 Ω to 32 Ω |
HEADPHONE |
nFM TUNER SECTION
Frequency range | 87.9 MHz to 107.9 MHz (Default) (200 kHz steps) |
Sensitivity | 87.5 MHz to 108.0 MHz (100 kHz steps) |
1.50 µV (IHF) | |
S/N 26 dB | 1.70 µV |
Antenna terminals | 75 Ω (unbalanced) |
Preset stations | 15 |
n AM TUNER SECTION
Frequency range | 520 kHz to 1710 kHz (10 kHz steps) |
Sensitivity S/N 20 dB at 1000 kHz | 560 µV/m |
Preset stations | 15 |
nCASSETTE DECK SECTION
Track system | |
Heads |
|
Record/playback | Solid permalloy head |
Erasure | Double gap ferrite head |
Motor | DC servo motor |
Recording system | AC bias 100 kHz |
Erase system | AC erase 100 kHz |
Tape speed | 4.8 cm/s |
Overall frequency response (+3, | |
Normal | 35 Hz to 14 kHz |
Wow and flutter | 0.10 % (WRMS) |
Fast forward and rewind time
Approx. 120 seconds with
n CD SECTION
Disc | CD, MP3, WMA, |
Sampling frequency | 8 cm/12 cm |
| |
CD | 44.1 kHz |
MP3/WMA | 32 kHz, 44.1 kHz, 48 kHz |
Bit rate |
|
MP3 | 32 kbps to 320 kbps |
WMA | 40 kbps to 192 kbps |
Decoding | 16 bit linear |
Pickup |
|
Beam source | Semiconductor laser |
Wavelength | 780 nm |
Number of channels | Stereo |
Frequency response | 20 Hz to 20 kHz (+1, |
Wow and flutter | Below measurable limit |
Digital filter | 8 fs |
D/A converter | MASH (1 bit DAC) |
n SD SECTION
Sampling frequency | 32 kHz (LP), 44.1 kHz (SP, XP) |
Coding system | SD audio playback (AAC/MP3/WMA) |
Number of channels | SD audio record (AAC) |
2 channel (stereo) |
n OTHER
CDèSD Recording speed: | Maximum 4 times (LP) |
nSPEAKER SECTION (Front speakers SB-PM71)
Type | 3 way, 3 speaker system |
Speaker units |
|
Woofer | 10 cm (4”) cone type |
Tweeter | 6 cm (2 3/8”) cone type |
Piezo type | |
Impedance | 6 Ω |
High | |
Low | 6 Ω |
Input power (IEC MAX) |
|
High | 40 W |
Low | 40 W |
Output sound pressure | 84 dB/W (1.0 m) |
Crossover frequency | 3 kHz, 10 kHz |
Frequency range | 50 Hz to 50 kHz |
Dimensions (WxHxD) | 60 Hz to 45 kHz |
145 mm x 250 mm x 232 mm | |
Mass | (5 23/32” x 9 27/32” x 9 5/32”) |
2.4 kg (5.3 lbs) |
n GENERAL
Power supply |
| AC 120 V, 60 Hz |
Power consumption |
| 141 W |
Dimensions (WxHxD) | 175 mm x 249.5 mm x 379.6 mm | |
Mass |
| (6 29/32” x 9 27/32” x 14 31/32”) |
| 5.8 kg (12.8 lbs) | |
|
| |
Power consumption in standby mode | Approx. 0.3 W | |
|
|
|
Note
1.Specifications are subject to change without notice. Mass and dimensions are approximate.
2.Total harmonic distortion is measured by digital spectrum analyzer.
RQT8046
42