System Requirements
Personal computer | IBM PC/AT compatible personal computer |
|
|
OS | Windows® 2000 Professional SP2, 3, 4 |
| Windows® XP Home Edition/Professional, or |
| SP1, 2 |
|
|
CPU | Intel® Pentium® III 500 MHz or higher |
|
|
RAM | 256 MB or more |
|
|
Display | High Color (16 bit) or more |
| Desktop resolution of 800 x 600 pixels or more |
| (1024 x 768 pixels or more recommended) |
|
|
Free hard disk space | 100 MB or more |
|
|
Necessary software | DirectX® 8.1 or later |
|
|
Sound | Windows compatible sound device |
|
|
Drive | |
| A |
| required. |
| (Recording can not work properly with |
| drives connected through an IEEE1394 |
| connection.) |
|
|
Interface | USB port (When devices are connected through |
| USB hub or by using USB extension cable, |
| operation is not guaranteed.) |
|
|
Other requirements | If you are using the CDDB function, then an |
| Internet connection is also required. |
|
|
•Even if the system requirements mentioned in these operating instructions are fulfilled, some personal computers can not be used.
•This software can not be used on Macintosh.
•Operation is not guaranteed when used on Windows OSs except those above.
•Operation on an upgraded OS is not guaranteed.
•Operation on an OS other than the one
•
•Only available when the user is logged in as the system administrator.
•This software may not run properly on
•This software can not be used on
• This software can not play and record music CDs that do not have the disc mark (⇒ right) on the disc label.
• This system requirements are not guaranteed in the case that any other application runs.
•Depending on your computer system, you may experience problems such as being unable to record or use recorded music data. Please note that Matsushita is in no way liable for any music data you lose, or for any other direct or indirect damages.
Note
•Do not remove SD Memory Cards during access by the SD Memory CARD Reader Writer.
•Operation of SD Memory CARD Reader Writers is not ensured under the following conditions.
–If the SD Memory CARD Reader Writer is equipped with an adaptor for other types of SD Memory Cards
–If connected via a USB hub or USB extension cord
•Using
•Handling precautions for the SD Memory CARD Reader Writer
–Do not wet, drop, or expose the SD Memory CARD Reader Writer to impacts.
–Do not use or store in locations directly exposed to sunlight, a heat vent, or a heating appliance.
–Do not disassemble or modify.
–Do not insert foreign objects into the slot.
•This unit is compliant with SD audio standards and is compatible with SD audio recording and playback. However, operation compatibility with all SD audio units is not guaranteed.
Convenient functions
Connecting SD Memory Cards
Follow these steps to connect the SD Memory CARD Reader Writer (not included) to the computer and insert SD Memory Cards.
1Turn on the computer and start Windows.
2Connect the SD Memory CARD Reader Writer to
the computer.
Make sure the SD Memory CARD Reader Writer is recognized and displayed in Windows Explorer or your file browser. (If it is not displayed, refer to the PDF Operating Instructions for
3Check the orientation of the SD Memory Card and
insert it in the SD Memory CARD Reader Writer.
Be careful to insert SD Memory Card in the right direction. Cards inserted incorrectly may be damaged or may damage the SD Memory CARD Reader Writer.
Removing SD Memory Cards
1Before removing SD Memory Cards, make sure the cards are not being accessed by the SD Memory CARD Reader Writer.
2
3Click [Eject].
4Remove SD Memory Cards.
RQT8046
37
