Panasonic SC-PM71SD manual Convenient functions

Convenient functions

Convenient functions

RQT8046

Setting the time

1Press [CLOCK/TIMER] to select "CLOCK".

Every time you press the button:

Original display

2Within 10 seconds:

Press [u2/REW, i1/FF] to set the day and press [LIST/ENTER].

Every time you press the button:

3Press [u 2/REW, i 1/FF] to set the time and press [LIST/ENTER].

•Press and hold to change the time faster.

The time is set and the original display is restored.

To display the clock

When the unit is on, press [CLOCK/TIMER].

When the unit is off, press [DISPLAY, –DIMMER].

To stop partway

Press [g STOP].

Note

•This is a 12-hour clock.

•Reset the clock regularly to maintain accuracy.

•If you set the clock, the demo function will turn off automatically.

•If there is a power failure or the plug is disconnected from the AC outlet, set this again.

Auto-off function

(When disc, card or tape is selected as the source and the unit is stopped) The unit turns off to save power if it is left unused for 10 minutes.

Press and hold [SLEEP, –AUTO OFF] until “AUTO OFF” is displayed.

Every time you press the button:

AUTO OFF v SCREEN SAVER (Auto off cancel) (⇒ page 12)

This function does not work if the source is tuner or AUX.

The sleep timer

This timer turns the unit off after a set time.

While enjoying the desired source:

Press [SLEEP, –AUTO OFF] to select the time (minutes).

Every time you press the button:

To cancel the sleep timer

Press [SLEEP, –AUTO OFF] to select “SLEEP OFF”.

To confirm the remaining time

Press [SLEEP, –AUTO OFF] once.

The remaining time is shown for about 5 seconds.

You can use the sleep timer in combination with the play/record timer. Make sure the unit is off before the play/record timer’s start time.

32