Entering titles on a CD (CD title memory)
The unit can record the disc titles for 100 CDs, 25 track titles per CD.
Preparation
1Insert the CD. (⇒ page 8)
2Press [q/h CD] and then [g STOP] to select “CD” as the source.
3To select a CD
Press [DISC], then press the numbered button to select the CD and press [g STOP].
1Press [TITLE IN].
2Press [u 2/REW, i 1/FF] to select the title type (Disc title/Artist name/Track title), track number, etc. and press [LIST/ENTER].
3Enter the characters (⇒ page 30) and press [LIST/ENTER].
Repeat steps 2 and 3 as necessary.
4Press [TITLE IN].
The title name is entered.
To stop partway
Press [TITLE IN].
To check titles
Press [DISPLAY,
Track titles appear during play or when you skip tracks while stopped. (Nothing is shown if you only enter spaces.)
To delete titles
1During stop, press [EDIT MODE]. “TITLE ERASE?” appears.
2Press [LIST/ENTER].
3Press [e, r] to select the title and press [LIST/ENTER]. “TITLE ERASE?” and “PRESS ENTER” alternatively appear.
4Press [LIST/ENTER].
The title is erased after “COMPLETE” is displayed. All the titles you entered for the disc are deleted.
Repeat to delete the titles on other CDs. To cancel, press [g STOP].
Entering titles on a SD after recording
Preparation
1Insert the SD card. (⇒ page 8)
•Securely close the lid of the SD card slot. You cannot edit if the lid is open.
2Press [q/h SD] and then [g STOP] to select “SD” as the source.
1Press [TITLE IN].
2Press [u 2/REW, i 1/FF] to select the track number and press [LIST/ENTER].
3Enter the track title (⇒ page 30) and press [LIST/ENTER].
4Enter the artist name (⇒ page 30) and press [LIST/ENTER].
Repeat steps 2 through 4 as necessary.
5Press [TITLE IN].
When “CARD Writing” stops flashing editing is complete.
To stop partway
Press [TITLE IN].
|
| Editing |
Note |
| |
|
| |
• Do not open the SD card lid while editing as the operation in progress |
| |
stops and the editing is not completed properly. |
| |
• You can use SD cards with capacities between 8MB and 1GB on this |
| |
unit. (⇒ page 6) |
| |
|
| |
Entering a playlist title |
| |
|
| |
Preparation |
| |
1Insert the SD card. (⇒ page 8)
•Securely close the lid of the SD card slot. You cannot edit if the lid is open.
2Press [q/h SD] and then [g STOP] to select “SD” as the source.
1Press [EDIT MODE] to select “PLAYLIST?” and press [LIST/ENTER].
2Press [u 2/REW, i 1/FF] to select “PL TITLE?” and press [LIST/ENTER].
3Press [u 2/REW, i 1/FF] to select the playlist and press [LIST/ENTER].
4Enter the characters (⇒ page 30) and press [LIST/ENTER].
When "CARD Writing" stops flashing editing is complete.
To stop partway
Press [g STOP].
Note
•Do not open the SD card lid while editing as the operation in progress stops and the editing is not completed properly.
•You can use SD cards with capacities between 8MB and 1GB on this unit. (⇒ page 6)
RQT8046
31
