Editing SDs
Preparation
1Insert the SD card. (⇒ page 8)
•Securely close the lid of the SD card slot. You cannot edit if the lid is open.
2Press [q/h SD] and then [g STOP] to select “SD” as the source.
Editing
To stop partway
Press [g STOP].
Note
•Do not open the SD card lid while editing as the operation in progress stops and the editing is not completed properly.
If you accidentally open the cover when editing an SD card, reinsert the card and check what you have edited. If there is a problem, delete what was edited, then do the editing again.
•You can use SD cards with capacities between 8MB and 1GB on this unit. (⇒ page 6)
RQT8046
Erasing tracks — TRACK ERASE/ALL ERASE
TRACK ERASE
1During stop or play
Select “TRACK ERASE?”.
Every time you press the button:
2Press [LIST/ENTER].
3Press [u 2/REW, i 1/FF] to select the track to erase and press [LIST/ENTER].
•Repeat this step to select other tracks (up to 24 tracks).
•During play, the current track is selected.
4Press [LIST/ENTER].
When “CARD Writing” stops flashing editing is complete.
ALL ERASE
All the
1During stop
Select “ALL ERASE?”.
Every time you press the button:
2Press [LIST/ENTER].
3Press [LIST/ENTER].
•When “CARD Writing” stops flashing editing is complete.
•If you erase all the tracks, “NO TRACK” is displayed.
•Editing SDs may take time when erasing a lot of tracks at one time or when erasing tracks in multiple playlists.
Moving tracks — MOVE
1During stop or play
Select “MOVE?”.
Every time you press the button:
2Press [LIST/ENTER].
3Press [u 2/REW, i 1/FF] to select the track to
be moved and press [LIST/ENTER].
During play, the current track is selected.
4Press [u 2/REW, i 1/FF] to select the new position and press [LIST/ENTER].
5Press [LIST/ENTER].
When “CARD Writing” stops flashing editing is complete.
28
