Matsushita CF-W4GWCZZ service manual USB Cable processing, Wire Rod processing of Lithium Battery

3.9.USB Cable processing

Process between the pin and the pin. Process between the boss and the HDD.

	Boss	USB Board
Pin	USB Cable
Process between the pin
and the Main Board.	Fix the substrate
HDD FFC	with two pins.

Put the cable when there is no space between the Main Board and the cable in the Main Board.

Process the USB cable on the Drive Board. Do not multiply the stress by the Drive Board.

Main Board

USB Cable

Drive

Open space between the Drive Board and the cable.

3.10. Wire Rod processing of Lithium Battery

Paste to round shape of the Bottom Case.

Draw out the cable straight.

03mm

Tape

Boss

02mm

Process the Antenna Cable between the Lithium Battery and the Boss.

3-8