Matsushita CF-W4GWCZZ service manual Remove the HDD, Remove the Top Case, Hdd Ffc

2.2.3.Remove the HDD

Preparation : perform the section 2.2.1. 2.2.2. first.

1.Remove the 2 Screws (V). Screw(V):DFHE5025XA(N1)

2.The slide is done in the direction of the arrow and the HDD Cover is removed.

Screw (V)

HDD Cover

3.Lift up the HDD Unit and remove the FFC Connector and then remove the HDD Unit.

4.HDD is taken out of the HDD Case.

Note:

Please do not bend pins of the HDD Connector, at the time of removing HDD and FFC Connector.

HDD Case

2.2.4.Remove the Top Case

Preparation : perform the section 2.2.1. , 2.2.2. first.

1.Insert a small screwdriver into the hole and slide the look in the direction shown by arrow (C) to open the Disc Cover.

2.The Anttena Cover (R) is rotated from the Bottom Case side in the direction of arrow (A) and the Antenna Cover (R) removed in the direction of arrow (B).

LCD unit

Antenna cover (R)

B

A

C

Back Side

HDD

FFC Connector

HDD FFC

Hole

Small screwdriver

HDD Unit

3.Remove the 3 Screws (B), 2 Screws (C) and 3 Screws (E) from the Bottom Case.

Screw(B):DRHM0092ZA(N4)

Screw(C):DXHM0057ZA(N7)

Screw(E):DXHM0039ZA(N6)

Screw (B) Screw (E)

Screw (B)

Screw (E)

Screw (E)

Screw (B)

Screw (C)

Screw (C)

2-3