Putting of PET Sheet
The cable must not run aground on the damper.
Along the LCD Module and put the LCD Cable (Inverter part) with the PET Tape.
PET Tape
Conductive Cloth (LCD cable)
LCD Cable (Inverter part)
Damper | LCD Cable |
|
Putting of Rear Damper
Conductive Cloth (LCD cable)
LCD Cable
Rib application putting of LCD Front Case 0
1mm
Externals suiting of Inverter Case | Rear Damper |
0 1mm |
|
Processing of Inverter Cable
The cable must not come in succession.
Inverter Cable
The cable must not run aground on the cushion.
Putting of Gasket (LCD)
The line of the remainder is put on Hinge (R) side.
Hinge (R)
Put on Hinge (R) surely.
Gasket (LCD)
Externals suiting of reflector 0
1mm
Put the reflector part surely.
