Matsushita CF-W4GWCZZ service manual

Putting of LCD Damper(C)

LCD Damper(C)

Plinth externals match 01mm

Rib application putting of LCD Front Case 01mm

Rib edge match of LCD Front Case 01mm

Rib application putting of LCD Front Case 01mm

Drawing out specification of LCD Cable Putting of Conductive Cloth of LCD Cable

LCD Cable (Inverter)

75 5mm	Conductive Cloth is wrapped
	(Leave the half)

The Cable is processed under the shaft .

Note:It is confirmed that the cable does not narrow between cabinets.

LCD cable processing 1

Process the LCD Cable (2) such as DC-IN Jack Holders, after process the Conductive Cloth of the LCD cable puts as shown in the figure below.

01mm

01mm

LCD Cable processing 2

Processing cable to under point hanging part

Processing the cable to the DC-IN Jack Holder

The cable is processed to the ditch

Put the Conductive Cloth

Connector connection specification

DC-IN Jack Holder

The order of connecting connector Inverter Cable LCD Cable

3-3