About This Guide, Features | Extron electronic DMP 44 LC specification

Introduction

This section describes this guide and the DMP 44 LC, including:

•About This Guide

•About the DMP 44 LC Digital Matrix Processor

•Features

•DMP 44 LC Application Diagram

About This Guide

This guide contains installation, configuration, and operating information for the

Extron DMP 44 LC Digital Matrix Processor, software controlled digital audio processor.

In this guide, the DMP 44 LC may also be referred to as “the DMP” or “device.”

About the DMP 44 LC Digital Matrix Processor

The DMP 44 LC is a standalone audio matrix processor with four line inputs and four line outputs. Using high-quality 24‑bit A/D converters sampling at 48 kHz, input signals are converted into the digital domain where Digital Signal Processing algorithms process and mix the signals. The DMP 44 LC uses a matrix design providing audio signal processing available in any of the input and output signal paths. A matrix mixer provides extremely flexible architecture, allowing for versatile processing, mixing, and routing scenarios.

An RS-232 port on the rear panel, plus a USB port located on the front panel provide convenient high-speed access. Three digital input ports permit connection of switches and sensors to provide input to the system for triggering a variety of actions within the device.

The DMP 44 LC has no front panel controls, therefore all configuration of DSP processors and the matrix mixer is performed using the Extron DSP Configurator™ program from a host computer via the RS-232 or USB communication ports.

Two operational modes, Live and Emulate, allow a user to work offline from the device to set up a configuration and create presets and group controls as needed before placing the configuration in the DMP 44 LC. DSP Configurator settings developed offline can be saved to disk as a job file that can be uploaded to the device at a later time, or can be transferred directly to the device by switching to Live mode. Up to 16 full or partial presets and up to

16 group master controls can be created, loaded into and stored in the DMP 44 LC. Control systems connected to the device by RS-232 can control a subset of DMP 44 LC functions using Extron Simple Instruction Set (SIS™) commands.

Features

•Consumer and professional audio compatibility — Line inputs provide gain settings to accommodate consumer (-10 dBV) and professional (+4 dBu) operating line level sources.

•Inputs — Four balanced or unbalanced line on 3.5 mm, 6-pole captive screw connectors.

DMP 44 LC • Introduction

DMP 44 LC specifications

The Extron DMP 44 LC is a powerful digital audio processor designed to cater to a wide range of audio distribution and mixing applications. It combines advanced audio processing capabilities with intuitive controls, making it an ideal solution for classrooms, conference rooms, and other professional audio environments. The DMP 44 LC features four inputs and four outputs, which provide incredible flexibility for any audio setup.

One of the standout features of the DMP 44 LC is its comprehensive DSP capabilities. The device incorporates Extron's renowned DSP technology, which offers extensive signal processing functionality including automatic mixing, gain sharing, EQ, delay, and filtering. These tools allow users to optimize audio performance, ensuring that sound quality is consistent and clear across all speakers and microphones.

In terms of connectivity, the DMP 44 LC offers a versatile array of input and output options. It includes balanced, low-impedance microphone and line level inputs, ensuring compatibility with a wide variety of audio sources. Outputs are also balanced, allowing for seamless integration with professional audio systems. The unit’s input and output configuration can be easily customized, accommodating different audio formats and setups.

The DMP 44 LC utilizes Extron’s patented ProDSP technology, which delivers precise signal processing capabilities without sacrificing audio quality. This technology supports high-resolution audio processing, enabling users to achieve the best sound reproduction possible. Moreover, the device allows for remote control and monitoring via an intuitive web-based interface, making it easy to manage audio settings from any location.

Another key characteristic of the DMP 44 LC is its robust design tailored for professional use. The compact form factor can be easily integrated into various environments, whether mounted in a rack or placed on a shelf. Additionally, its enhanced thermal management and sturdy construction ensure reliability and durability in demanding applications.

The DMP 44 LC embodies the latest advancements in audio technology, making it a reliable choice for professionals seeking high-quality sound management. With its extensive features, the digital audio processor allows for seamless audio mixing and processing, ensuring optimal performance in any audiovisual setup.