Additional information | 10 |
•If the unit does not operate normally due to external effects such as static electricity discon- nect the power plug from the outlet and insert again to return to normal operating condi- tions.
Resetting the main unit
Use this procedure to reset all the receiver’s settings to the factory default. Use the front panel controls to do this.
1 Switch the receiver on.
2 While holding down the TONE button, press and hold the STANDBY/ON button for about three seconds.
3When you see RESET? appear in the display, press the TONE button. OK? shows in the display.
4Press TONE once more to confirm.
OK appears in the display to indicate that the receiver has been reset to the factory default settings.
67
En