Pioneer VSX-D712 Controlling the rest of your system, Clearing all the remote control settings

Page 59

Controlling the rest of your system

Controlling the rest of your system

09

If the correct code has been input the power of the component being input will turn on or off.

The power of the component being input will only turn on or off if that component is able to be turned on directly by remote control.

•You can only input a code for the compo- nent type written on each MULTI CONTROL button (except RECEIVER and TUNER).

•Even if you don’t input a preset code for the TV (TV/SAT MULTI CONTROL button) you will be able to control your TV using the dedicated TV CONTROL on the remote if you have assigned it to the TV CONT button.

•You may not be able to use a particular code even if it is listed on page 63.

•The remote control buttons will not be able operate other equipment unless preset with the method above.

4Repeat steps 2 through 3 to try a different code, or to enter a code for another component you want to control.

5When you’re done, press RECEIVER.

Clearing all the remote control settings

You can clear all presets and restore the factory default settings.

•While pressing the RECEIVER button, press and hold the 0 button for three seconds.

The LED blinks three times indicating the settings have been restored to the factory presets.

Direct function

• Default setting: ON

You can use the direct function feature to control one component using the remote control while at the same time, using your receiver to playback a different component. This could let you, for example, use the remote control to set up and listen to a CD on the receiver and then use the remote control to rewind a tape in your VCR while you continue to listen to your CD player.

When direct function is on, any component you select (using the MULTI CONTROL buttons ) will be selected by both the receiver and the remote control. When you turn direct function off, you can operate the remote control without affecting the receiver.

1While pressing the RECEIVER button, press and hold the 4 button.

The LED blinks.

2Press the MULTI CONTROL button for the component you want to control.

The LED lights.

3Use the number buttons to enter either 1 (direct on) or 2 (direct off). The LED blinks again.

4Repeat steps 2 through 3 for the other components you want to control.

5When you’re done, press RECEIVER.

•You can’t use direct function for TUNER.

59

En

Image 59

Contents Operating Instructions VSX-D712 VSX-D812AUDIO/VIDEO MULTI-CHANNELRECEIVER Wash hands after handling IMPORTANT NOTICEPage 01 Before you start Contents03 Connecting up 06 Setting up the receiver10 Additional information 07 Using the tuner08 Making recordings 09 Controlling the rest of your systemChecking what’s in the box Installing the receiverBefore you start 01Before you start ChapterBefore you start Operating range of the remote control unitIntroduction to home theater 5 minute guide025 minute guide Chapter 2 Hook up your TV 5 minute guideListening to Surround Sound 1 Hook up your DVD playerVSX-D712 025 minute guidePowered Front speakersFront speakers 5 minute guideSurround back speaker or subwoofer 6Play a DVD, and adjust the volume to your liking025 minute guide VSX-D8127.0ch 5 minute guide Using the Quick Setup2.0ch 3.0ch025 minute guide FWD MID BACKS-videocables Connecting upConnecting up Chapter Audio/Video cordsDVD player 03Connecting up Connecting digital componentsThis receiver CD recorder Satellite tuner CD playerCD player CD-R/Tape/MDdeck Connecting upConnecting audio components This receiverConnecting DVD multi-channelcomponents 03Connecting upConnecting up Connecting video componentsConnecting to the front panel video terminalAntenna snap connectors 03Connecting up Connecting antennasFM wire antenna Using external antennasFRONT Connecting the speakers VSX-D712Connecting up ASSIGNABLESurround speakers 03Connecting up Connecting the speakers VSX-D812Powered subwoofer Connecting up Hints on speaker placementSpeaker terminals A and B speaker systems03Connecting up Overhead view of 5.1 channel speaker setup3-Dview of 5.1 channel speaker setup Overhead view of 6.1 channel speaker setupConnecting up 3-Dview of 6.1 channel speaker setupOverhead view of 7.1 channel speaker setup 3-Dview of 7.1 channel speaker setupSurround back 03Connecting up Connecting additional amplifiersVSX-D812 VSX-D712Connecting up Power cord cautionAC outlet Receiver Operating other Pioneer components03Connecting up Front panel Controls and displaysControls and displays Chapter04Controls and displays See Using the Quick Setup on pageControls and displays Display13ADV.SURR. Advanced Surround 15TUNER indicators STEREO16Master volume level 04Controls and displays13 14 Controls and displays Remote controlFL DIMMER 04Controls and displaysControls and displays D.ACCESSStereo/Direct Playing sources05Playing sources Chapter Introduction to Sound ModesNeo 6 Music MUSIC Choosing the input signalPlaying sources Advanced Surround modesDVD 5.1 ch 05Playing sourcesListening to multi-channelplayback AUTOEXPANDED GAME Using Stereo/DirectUsing Advanced Surround 6-STEREOSB ON SB OFF SB AUTO 05Playing sources Using the Surround BackChannel SB CH Playing sources Using the Virtual Surround Back mode VSBVSB ON VSB OFF VSB AUTO MIDNIGHT Off LOUDNESS Using Midnight and Loudness listeningUsing the tone controls Playing other sourcesSelecting the multi-channelanalog inputs Using the sleep timerThe sleep timer switches the receiver into control to set the sleep timerChoosing your receiver setup Setting up the receiver06Setting up the receiver Chapter Speaker setting Setting up the receiverCrossover frequency setting 06Setting up the receiverSubwoofer setting Surround back speaker setting100Hz 150Hz 200Hz Front left speaker distance settingLFE attenuator setting Center speaker distance settingSurround left speaker distance setting Surround back speaker distance settingFront right speaker distance setting Surround right speaker distance settingDual mono setting Subwoofer distance settingDynamic range control setting Component video input settingsOptical digital Surround back channel input settingDigital input settings Coaxial digitalSetting up the receiver Manually calibrating your listening area MCACCR C LS SW SB RS R C LS SW SB RS L C R RS SW LS SB06Setting up the receiver The receiver returns to the Standard mode Setting up the receiverListening to the radio Using the tuner07Using the tuner Chapter Tuning directly to a stationSaving station presets Using the tunerListening to station presets 07Using the tunerNaming station presets Making recordings The receivers volume, balance, tonesignal Making recordings09Controlling the rest of your system Chapter Setting the remote to control other componentsSelecting preset codes directly Controlling the rest of your systemDirect function Clearing all the remote control settingsControlling the rest of your system Function 09Controlling the rest of your systemControls for TVs ButtonsFunction Controls for other componentsButton s Controlling the rest of your systemComponents 09Controlling the rest of your systemButton s FunctionTUNER Preset Code ListSTB SATELLITE On digital STBTEAC 09Controlling the rest of your systemSONY YAMAHA 315 , 314 , 328, MDAdditional information TroubleshootingProblem Additional informationRemedy 10Additional informationProblem Additional information Resetting the main unitSignal-to-NoiseRatio 10Additional information SpecificationsContinuous power output stereo Continuous power output surroundFurnished parts Cleaning the unitAM tuner section Miscellaneous10Additional information Additional information PIONEER EUROPE NV PIONEER CORPORATIONPIONEER ELECTRONICS USA INC PIONEER ELECTRONICS OF CANADA, INC