Bosch Appliances DCN Synoptic Microphone Control user manual ‘Microphone number OK’

Page 58

CONTROLLING A CONFERENCE

• Click on the ‘OK’ button to start the test.

 

• Click on the ‘Cancel’ button to cancel the test.

 

Selecting ‘Start’ causes all microphones to be switched off, the current

 

speakers and request-to-speak lists to be cleared (where applicable) and all

 

microphone keys to become inoperative until testing has been completed.

 

The ‘Results’ text field will be also be cleared. If the noise generator is active,

 

the system will perform a test on every microphone that has been given a

 

seat number in the currently open installation file. The microphones will be

 

tested one by one, and a message will be displayed in the ‘Results’ text field

 

after each microphone has been tested. If the microphone is working prop-

 

erly, the following message is displayed:

4

‘Microphone <number> OK’

If the microphone is not working properly, the following message is displayed:

‘Microphone <number> Faulty’

If you wish to temporarily stop testing:

• Click on the ‘Hold’ push button.

Testing will be suspended, but microphones remain off and the noise from the noise generator will still be present. The ‘Results’ text field will display a message for the unit currently being tested. The ‘Start’ push button becomes a ‘Restart’ push button. The ‘Measure’ push button becomes active. This allows you to re-test the microphone currently shown in the ‘Test’ field. To re-test:

• Click on the ‘Measure’ push button.

The microphone is tested again and the result is displayed in the ‘Results’ field.

If you wish to re-start testing:

• Click on the ‘Restart’ push button.

Testing will be re-started from the unit at which the testing was suspended.

Digital Congress Network

Synoptic Microphone Control

Page 4-13

Software User Manual

Page 57 Page 59
Image 58
Page 57 Page 59
Contents DCN Synoptic Microphone Control General Contents Explanatory Notes About this manualEnter, Shift, etc Manual conventionsTypographical conventions Shown asCTRL+P, ALT+F4Explanatory Notes Synoptic Microphone Control Contents Refer to , ‘Preparing for a Conference’ What is Synoptic Microphone Control?Refer to , ‘Controlling a Conference’ Synoptic Microphone Control What is a Synoptic LAYOUT? Making a graphical representationMicrophone Management Controlling Microphones Conference proceduresMicrophone operation modes Microphone Management Microphone Management Getting Started Contents Getting Started Starting Synoptic Microphone Control DCN Startup screenGetting Started From Startup’Index Getting Started Using HelpHelp menu KeyboardProcedures CommandsGlossary Using Help About Synoptic Microphone Control‘About...’ window This page left intentionally blank Preparing for a Conference Contents Preparing for a Conference Using Layout Mode Main windowMenu bar Preparing for a ConferenceTool box Preparing for a Conference Layout Options Preparing for a Conference Making a LayoutMicrophone seat numbers Large icons ‘Select Grid’ dialogue box Without ‘Snap’ Positioning icons on a layoutEditing icons in a layout Select the ‘Edit’ menu and click on ‘Cut’ ‘The seat number entered does not exist’ To do so Open the DCN.INI file in the C\windows directory Preparing for a Conference Specifying Conference Procedures Specifying the microphone operation modeMeters, ‘Microphone Settings’ and ‘Active Mics’ Specifying additional microphone parameters Is covered in chapterTo turn the microphone off, repeat the above Preparing for a Conference Preparing for a Conference Working with Layout Files Layout file options‘Changes have been made to filename.’ ‘Do you want to save?’ ‘A file already exists with this name’‘Two or more icons have the same seat number!’ Opening an existing layout file to do soSelect the ‘File’ menu and click on ‘Save As...’ ‘Save As’ dialogue box ‘Delete’ dialogue box ‘Are you sure you want to delete file filename’‘Import’ dialogue box Preparing for a Conference Going to Control Mode This page left intentionally blank Controlling a Conference Contents Conventions used in this chapter Controlling a Conference What is Control MODE?Monitoring and controlling a conference Icon statusControlling a Conference Controlling a Conference Control Mode Display Options SectionControlling a Conference Using Control Mode Switching microphones on and offControlling a Conference ‘Action Box’ Controlling a Conference Accessing Conference Information Checking the conference statusReturning to layout mode Controlling a Conference Printing ‘Print Activity’ dialogue boxControlling a Conference Controlling a Conference Microphone Testing Select the ‘Settings’ menu and click on ‘Microphone Test...’‘Microphone number Faulty’ ‘Microphone number OK’Controlling a Conference Temporarily exiting Synoptic Microphone Control ‘Changes have been made to filename Do you wish to save?’This page left intentionally blank Appendix a Reference Guide Contents File menu Appendix a Reference Guide Control MenusEdit menu Appendix a Reference Guide Settings menuView menu Shift Clear RequestsAppendix a Reference Guide Accelerator Keys Menu Short-cut Appendix a Reference Guide Index ABCGhij Opqr Wxyz

DCN Synoptic Microphone Control specifications

The Bosch Appliances DCN Synoptic Microphone Control is a cutting-edge solution designed to facilitate effective communication and enhance audio performance in various environments. This system is particularly beneficial for conference halls, auditoriums, and other large venues where clear audio transmission is crucial.

One of the main features of the DCN Synoptic Microphone Control is its intuitive interface, allowing users to manage multiple microphones seamlessly. The system utilizes a graphical user interface (GUI) that provides real-time information about microphone status, channel activation, and battery levels. This user-friendly design makes it easy for operators to monitor and control the audio setup without technical difficulties.

The DCN Synoptic System integrates advanced digital signal processing (DSP) technology to optimize audio clarity and reduce feedback. This ensures high-quality sound reproduction during discussions and presentations, allowing participants to engage fully in the dialogue. The DSP capabilities also include features like automatic gain control, which adjusts the microphone input levels to maintain consistent sound quality regardless of the speaker's distance from the microphone.

Another essential characteristic of the DCN Synoptic system is its scalability. The system can be expanded to accommodate a large number of microphones, making it ideal for events or venues that require extensive audio coverage. The ability to connect multiple units seamlessly allows for adaptable setups tailored to specific needs, whether for small meetings or large conferences.

Connectivity is further enhanced through the use of standard network protocols, allowing integration with other Bosch audio and visual systems. This interconnectivity ensures that the DCN Synoptic Microphone Control can work harmoniously with existing infrastructure, creating a cohesive audio-visual solution.

Moreover, Bosch has incorporated robust security features within the DCN system to safeguard against unauthorized access or interference. The system employs encryption protocols to ensure the integrity of the audio signals and protect sensitive information discussed during sessions.

In conclusion, the Bosch Appliances DCN Synoptic Microphone Control stands out for its advanced features, including user-friendly interface, DSP technology, scalability, and secure connectivity. These characteristics make it a premier choice for organizations seeking to enhance their audio communication capabilities in professional settings. By fostering clear and reliable communication, the DCN Synoptic system plays a vital role in ensuring the success of meetings and events.
Top Page Image Contents