Introduction | Omnitron Systems Technology HM-1000 specs

OPERATING INSTRUCTIONS

HM-1000

Hand-held microphone

CAUTION!

Keep this device away from rain and moisture!

Only use batteries recommended by the manufacturer!

For your own safety, please read this user manual carefully

before you initial start-up.

Every person involved with the installation, operation and maintenance of this device has to

-be qualilfied

-follow the instructions of this manual

-consider this manual to be part of the total product

-keep this manual for the entire service life of the product

-pass this manual on to every further owner or user of the product

-include every supplementay update with the original manual

1. INTRODUCTION

Thank you for having chosen an OMNITRONIC HM-1000. If you follow the instructions given in this manual, we can assure you that you will enjoy this device for many years.

Unpack your OMNITRONIC HM-1000.

Please make sure that there are no obvious transport damages. Should you notice any damage, do not take the device into operation and immediately consult your local dealer.

1.1 Features

Rugged hand-held microphone

Provides high-quality vocal and voice pickup for stages, discotheques, public speaking, theater etc. • Operation in the low-interference UHF-band (790-814 MHz) • Up to 16 mics with 16 receivers can be operated simultaneously • Frequency and sensitivity switchable via mini-switches • 193 carrier frequencies switchable in 125 kHz steps • Sensitivity switchable in 4 steps • Automatic frequency scan possible • LCD- display with battery capacity and frequency • Battery capacity transmission to receiver • Lock-function to avoid undesired changes by the user • Latest transmission technology in a rugged metal housing • Mute- function for interference free transmission: receiver goes in mute-mode when signal is absent or too weak • For 2 x 1.5 V Mignon batteries (type AA) • Operation range 100 meters • Delivery includes 8 colour caps for the individual mics on stage

8/21	13055090_V_1_1.DOC