AKG Acoustics C2000B manual Cleaning, Standard Accessories, Optional Accessories, Specifications

Adding Phantom Power to Unbalanced Amplifier Inputs

Cleaning

To clean the metal surfaces, use methylated spirits or alcohol.

Standard Accessories

H 85 shock mount

Optional Accessories
For optional accessories, refer to the current AKG catalog or folder, or
B 18	battery power supply
visit www.akg.com. Your dealer will be glad to help.
MK 9/10	10- audio cable with 3-pin XLR connectors
N 62 E	AC power supply for two microphones
N 66 E	AC power supply for six microphones
PF 100	studio pop filter
SA 41/1	stand adapter
ST 102 A	floor stand
ST 200	heavy floor stand
W 4000	external windscreen (supplied with the C 4000 B)

Specifications

Type:	condenser pressure gradient
	microphone
Polar patterns:	cardioid
Sensitivity at 1000 Hz:	20 mV/Pa		- 34 dBV
Frequency range:	30 to 20,000 Hz (refer to frequency
	response curve)
Electrical impedance:	≤	200 ohms
Recommended load impedance:	≥	1000 ohms
Bass cut filter slope:	6 dB/octave below 500 Hz
Preattenuation pad:	-10 dB, switchable
Equivalent noise level
to IEC 60268-4:		30 dB
Equivalent noise level
to IEC 60268-4 (A-weighted):	20 dB-A
Signal/noise ratio re 1 Pa
(A-weighted):	74 dB*)
Max. SPL for 0.5% THD (0/-10 dB): 200 / 630 Pa			140 / 150 dB SPL*)
Dynamic range:	120 dB (A-weighted)*)
Environment:	- temperature: -10°C to +60°C
	- (14°F to 140°F)
	- relative humidity: 90% (+20°C/68°F),
		85% (+60°C/140°F)
Power requirement:	9 to 52 V phantom power
	to IEC 61938
Current consumption:	≤	2 mA
Connector pinout:	3-pin male XLR to IEC standard
Size:	max. dia.: 53 mm (2.1 in.),
	length: 159 mm (6.3 in.)
Net weight:	325 g (11.5 oz.)

*) Values for 48 V phantom power; reduce by 3 dB for 24 V and 6 dB for

12 V phantom power.

This product conforms to the standards listed in the related Declaration of Conformity. To order a free copy of the Declaration of Conformity for this product, visit http://www.akg.com or contact sales@akg.com.

8