Pioneer VSX-LX51 Before using synchronization, About Hdmi Control, Synchronized amp mode

Page 64

09HDMI Control

1Press RECEIVER, then press the SETUP button.

2Select ‘Other Setup’, then press ENTER.

3Select ‘HDMI Control Setup’ from the Other Setup menu.

7.Other Setup

 

7d.HDMI Control

Setup

 

a . Multi

Channel In Setup

 

HDMI Control

 

 

 

 

 

OFF

 

b . ZONE Audio Setup

 

 

 

 

 

 

c . SR+

Setup

 

 

 

 

 

 

d . HDMI Control Setup

 

 

 

 

 

 

 

e . OSD

Adjustment

 

 

 

 

 

 

 

 

:Return

 

 

 

:Finish

4Select the ‘HDMI Control’ setting you want.

ON – Enables the HDMI Control function. When this receiver’s power is turned off and you have a supported source begin playback while using the HDMI Control function, the audio and video output from the HDMI connection are output from the flat screen TV.1

OFF – The HDMI Control is disabled. Synchronized operations cannot be used. When this receiver’s power is turned off, audio and video of sources connected via HDMI are not output.

5When you’re finished, press SETUP.

You will finish to System Setup menu.

Before using synchronization

Once you have finished all connections and settings, you must:

1Put all components into standby mode.

2Turn the power on for all components, with the power for the flat screen TV being turned on last.

3Choose the HDMI input to which the TV is connected to this receiver, and see if video output from connected components displays properly on the screen or not.

4Check whether the components connected to all HDMI inputs are properly displayed.

Synchronized amp mode operations

By connecting a component to this receiver with an HDMI cable you can use synchronized amp mode, which

allows you to synchronize the following operations2:

Displays on the flat screen TV when you mute or adjust the volume of this receiver.

The input of this receiver is automatically changed when playback occurs on a connected component.

Even if you change this receiver’s input to a device that is not connected by HDMI, the synchronized amp mode remains in effect.

This receiver’s input switches automatically when the channel is switched on an HDMI control-compatible flat screen TV.

By pressing GENRE when listening to a source from a HDD/DVD recorder, the most appropriate listening mode is automatically selected (see Using the genre synchronizing function on page 34 for more on this).

Canceling synchronized amp mode

Operate the flat screen TV to cancel the synchronized amp mode.

If you cancel synchronized amp mode while connected via HDMI to a flat screen TV or while you are watching a TV programme, the power for this receiver is turned off.

About HDMI Control

Connect the flat screen TV directly to this receiver. Interrupting a direct connection with other amps or an AV converter (such as an HDMI switch) can cause operational errors.

Only connect components you intend to use as a source to the HDMI input of this receiver. Interrupting a direct connection with other amps or an AV converter (such as an HDMI switch) can cause operational errors.

Synchronized amp mode

Synchronized amp mode begins once you carry out an operation for the flat screen TV. For more information, see the operating manual of your flat screen TV.

Note

1• When HDMI Control is set to ON, the audio/video signals input at the HDMI IN terminals are output at the HDMI OUT terminal even when this receiver is switched off.

• With HDMI Control set to ON, Input Setup and HDMI Input are automatically set to OFF.

2The linked mode remains in effect even when this receiver’s input is switched to something other than HDMI.

64

En

Image 64
Contents Operating Instructions Important the Moulded Plug Risk of Electric Shock Do not OpenOperating Environment Contents Other Settings Using other functionsOther connections Hdmi ControlBefore you start FeaturesBefore you start Chapter Installing the receiver Before you startChecking what’s in the box Loading the batteriesMinute guide 02 5 minute guide ChapterIntroduction to home theater Listening to Surround SoundFollow the instructions on-screen Problems when using the Auto Mcacc Setup 02 5 minute guidePlaying a source Select the input source you want to playBetter sound using Phase Control Phase Control onPhase Control OFF Minute guideConnecting your equipment Connecting your equipment ChapterConnecting your equipment Connecting your equipment When making cable connections About the video converterConnecting your equipment Connecting using Hdmi About HdmiConnecting your equipment Connecting your TV and DVD player Connecting your Blu-ray disc playerFor a second recorder, use the DVR2 in inputs Using the component video jacks Connecting digital audio sourcesConnecting a component to the front panel inputs Connecting analog audio sourcesAbout the WMA9 Pro decoder Connecting your equipment Installing your speaker system Connecting the speakersBare wire connections Placing the speakersConnecting antennas THX speaker system setupPlug the power cord into a power outlet Connecting external antennasPlugging in the receiver Controls and displays Controls and displays ChapterFront panel 13 14Controls and displays Operating range of remote control unitSpeakers Controls and displays Display Controls and displays Remote control RECEIVERTV Ctrl SOURCEMute ReceiverListening to your system Listening to your system ChapterAuto playback Listening in surround soundUsing the Home THX modes Using the Advanced surround effectsListening to your system PRO LOGIC+THX CinemaListening in stereo Using Front Stage Surround AdvanceTip Listening to your system Using Stream Direct Selecting Mcacc presetsChoosing the input signal Hdmi Digital AnalogUsing the Virtual Surround Back mode Using surround back channel processingAuto Sources Using the tuner Using the tuner ChapterSaving station presets Listening to the radioUsing the tuner Naming station presetsListening to station presets An introduction to RDSUsing EON Displaying RDS informationSystem Setup menu System Setup menu ChapterMaking receiver settings from the System Setup menu Automatic Mcacc ExpertSystem Setup menu Custom Menu The default is ALL recommendedSetting , Channel Level , Speaker Distance and EQ Options are ALL , Keep SP System , 6 SpeakerIf necessary, confirm the speaker configuration in the OSD.1 Surround back speaker setting Manual Mcacc setupAdjust the level of the left channel Select ‘Fine SP Distance’ from the Manual Mcacc setup menuFine Channel Level Fine Speaker DistanceAcoustic Calibration EQ Adjust Select ‘Standing Wave’ from the Manual Mcacc setup menuAdjust the parameters for the Standing Wave Control Select ‘EQ Adjust’ from the Manual Mcacc setup menuHow to interpret the graphical output How to use Acoustic Calibration EQ ProfessionalSelect the channels you want and adjust to your liking Acoustic Calibration EQ ProfessionalSelect ‘EQ Professional’, then press Enter Using Acoustic Calibration EQ ProfessionalSelect an option and press Enter Checking Mcacc preset data Select ‘Data Management’ from the System Setup menuSelect the setting you want to check Data ManagementManual speaker setup Renaming Mcacc presetsClearing Mcacc presets Copying Mcacc preset dataSelect ‘Speaker Setting’ from the Manual SP Setup menu Speaker SettingChannel Level Speaker Distance THX Audio Setting CurveConnecting an iPod Connecting your iPod to the receiverOther connections Other connections ChapterSwitching the iPod controls2 Other connectionsBasic playback controls ReturnOther connections Connecting a USB device Connecting your USB device to the receiverBasic playback controls Connect your USB device.3Compressed audio compatibility Other compatibility informationAbout MPEG-4 AAC About WMAOther connections Connecting the multichannel analog inputs Speaker B setupSwitching the speaker system Selecting the multichannel analog inputsBi-amping your front speakers Bi-wiring your speakersConnect your speakers as shown below Making MULTI-ZONE connections MULTI-ZONE listeningLarge Using the MULTI-ZONE controls Basic MULTI-ZONE setup ZoneSurround Back System MULTI-ZONE setup Zone MULTI-ZONE listening optionsConnecting an IR receiver MULTI-ZONE remote controlsUsing this receiver with a Pioneer flat screen TV Pioneer flat screen TVUsing the SR+ mode with a Pioneer flat screen TV Advanced Mcacc output using your PC Other connections Connecting a PC for Advanced Mcacc outputSelect ‘Output PC’ and press Enter Setting the Hdmi options Setting the Hdmi Control modeHdmi Control Hdmi Control ChapterBefore using synchronization Synchronized amp modeHdmi Control About Hdmi ControlOther Settings Other Settings ChapterInput Setup menu SetupOther Settings Other Setup menuInput function default and possible settings Select ‘Other Setup’ then press EnterMulti Channel Input Setup Zone Audio SetupSR+ Setup for Pioneer flat screen TVs OSD AdjustmentSelect ‘SR+ Setup’ from the Other Setup menu Select the ‘PDP Volume Control’ setting you wantUsing other functions Using other functions ChapterSetting the Audio options Press Return to confirm and exit the menuUsing other functions Setting the Video optionsUse / to select the setting you want to adjust Press RECEIVER, then press Video ParameterMaking an audio or a video recording Select the source you want to recordPrepare the source you want to record Prepare the recorderUsing the sleep timer Switching the speaker impedanceChecking your system settings Dimming the displayUsing other functions Resetting the system Default system settingsPress the front panel Auto SURR/STREAM Direct button Press Home THX to confirmSetting the remote to control other components Preset code listSelecting preset codes directly Controlling the rest of your systemControlling the rest of your system VCRCatv TapeControls for TVs Controls for other componentsDecide which component you want to use the remote sensor DisplayHDD Continue the chain in the same way for as manyTroubleshooting PowerAdditional information Additional information ChapterAdditional information Other audio problems Settings VideoProfessional Calibration EQ graphical output Signal SEL buttonDisplay Remote control USB interfaceOr other setting for your component Other setting for your componentReceiver to a component or TV with the DeepColor feature Hdcp Error showsConfiguration B Configuration aImportant information regarding the Hdmi connection Additional information Surround sound formats DolbyWindows Media Audio 9 Professional DTS Digital SurroundDTS Neo6 DTS 96/24Additional information About THX About Neural THX Surround Stereo 2 channel signal formats ON/AUTOPRO Logic +THX PRO LogicMultichannel signal formats DTS +Neo6 DTS +Neo6 +THX Cinema Pro Logic llx Music +THX a EX +THX Games bConnected Not connectedAdditional information Specifications Cleaning the unitPioneer Corporation