T r o d u c t i o n, Jack  | Harman-Kardon CBL 410 PCC guide

I n t r o d u c t i o n

IN jack 

Thank you for purchasing an AKG product. This microphone provides optimum intelligibility and audio quality for your meetings.

The CBL 410 PCC is also an excellent choice for recording applications.

Please take a few minutes to read the instruc- tions, specifically the “Safety” and “Environment” sections, carefully before operating the equipment. Please keep the Manual for future reference.

U s e

Single-microphone Setup

Insert the plug on the cable of your CBL 410 PCC into the microphone input jack on your computer. The microphone is a true “plug and play” device, so there is no need to install a driver.

Place the microphone as far away from any loud- speaker as possible and as close as possible to the talker. Your microphone is now ready to operate.

Multiple Microphones

For online meetings with several talkers at your end of the line, you will need more than one CBL 410 PCC to capture all voices in the best possible way.



Safety grill: do not cover with documents or any other objects!

Follow the instructions in “Single-microphone Setup”.

Connect the second microphone to the IN jack on the first microphone, the third microphone to the second one, and so on. Do not “daisy- chain” more than four microphones in this way. Five or more microphones would overload the microphone power supply on your computer, resulting in audibly deteriorating sound quality. Place the microphones on the conference table such that no talker will be further away from a microphone than 60 to 80 cm (24 to

30 inches). The 1-m (3-ft. 4-in.) microphone cable should normally be long enough for the purpose unless the table is too wide (see page 14). After the conference, simply dismantle all connected microphones and bring into their default state.