Pioneer VSX-817-S/-K operating instructions Controlling the rest of your system Direct function

Page 47

Controlling the rest of your system

09

Direct function

• Default setting: ON

You can use the direct function feature to control one component using the remote control while at the same time, using your receiver to playback a different component.

This could let you, for example, use the remote control to set up and listen to a CD on the receiver and then use the remote control to rewind a tape in your VCR while you continue to listen to your CD player.

When direct function is on, any component you select (using the MULTI CONTROL buttons) will be selected by both the receiver and the remote control. When you turn direct function off, you can operate the remote control without

affecting the receiver.1

1While pressing the RECEIVER button, press and hold the 4 button.

The LED blinks.

2Press the MULTI CONTROL button for the component you want to control. The LED lights on continuously.

3Use the number buttons to enter either

1(direct on) or 2 (direct off). The LED blinks again.

4Repeat steps 2 through 3 for the other components you want to control.

5When you’re done, press RECEIVER.

Clearing all the remote control settings

You can clear all presets and restore the factory default settings.

•While pressing the RECEIVER button, press and hold the 0 button for three seconds. The LED blinks three times indicating the settings have been restored to the factory presets.

English Deutsch Français Italiano Nederlands Español

Note

1 You can’t use direct function with the AM / FM and TV CTRL (+SHIFT) functions.

47

En

Image 47

Contents VSX-817 Federal Communications Commission Declaration of Conformity Risk of Electric Shock Do not Open Contents Additional information Other SettingsControlling the rest of your system Other connectionsLoading the batteries Before you startBefore you start Chapter Checking what’s in the boxListening to Surround Sound Minute guideMinute guide Chapter Introduction to home theater02 5 minute guide Automatically setting up for surround sound McaccMake sure ‘OK’ is selected, then press Minute guideFollow the instructions on-screen Wait for the test tones to finishPress Phase Phase Control to switch on phase correction Better sound using Phase ControlOther problems when using the Auto Mcacc Setup Making cable connections Connecting upConnecting up Chapter This receiver to a video input on your TV Connecting up Connecting a DVD player and TVConnect the analog audio outputs from This will allow you to play the sound fromConnect an optical digital audio output Connecting upConnecting the multichannel analog outputs Audio and Video inputs on this receiver.2About the WMA9 Pro decoder Connecting up Connecting other audio componentsDVR, VCR, LD player, etc Connecting other video componentsComp 1 DVD Comp 2 TV Comp 3 DVR Using the component video jacksConnecting to the front panel video terminal Connecting to the front panel audio mini jackTo improve AM reception Connecting up Connecting antennasUsing external antennas To improve FM receptionSurround speakers Surround back speakers Connecting up Connecting the speakersSurround and surround back speakers Hints on speaker placementWhen placing speakers near the TV, we AC outlet Overhead view of speaker setupView of 7.1 channel speaker setup Front panel Controls and displaysControls and displays Chapter Display Controls and displaysAuto Surr DigitalVIR.SB DirectControls and displays Remote control TOP Menu Master Volume +Setup Level +Operating range of remote control Listening in surround sound Listening to your systemListening to your system Chapter Auto playbackListening to your system Using the Advanced surround effectsSetting the effect options Setting What it doesListening in stereo Using Front Stage Surround AdvanceListening with Acoustic Calibration EQ Listening to your system Using Stream DirectUsing surround back channel processing Using Virtual Surround Back VSB Using Midnight and LoudnessPlaying other sources Listening to your system Using the Sound RetrieverUsing the tone controls Choosing the input signalPlayback the connected component Selecting the front audio inputsSelect the setting you want to adjust System Setup menuSystem Setup menu Chapter Surround back speaker settingSelect the surround back speaker setting System Setup menuManual Mcacc speaker setup Select ‘Surr Back System’ from the System Setup menuFine Speaker Distance Select ‘Fine Ch Level’ from the Manual Mcacc setup menuSelect ‘Fine SP Distance’ from the Manual Mcacc setup menu Fine Channel LevelManual Mcacc setup menu Setting the Acoustic Calibration EQ Automatically8, ALL CH Adjust and Front Align Select ‘EQ Auto Setting’ fromSelect ‘OK’ to copy and confirm Copying your Acoustic Calibration EQ settingsSetting the Acoustic Calibration EQ manually Select ‘EQ Data Copy’ from the Manual Mcacc setup menuChecking your Acoustic Calibration EQ settings Manual speaker setupManual SP Setup menu Speaker SettingChannel Level Select ‘Crossover Network’ from the Manual SP Setup menuWhen you’re finished, press Return Crossover NetworkSpeaker Distance Listening to the radio Using the tunerUsing the tuner Chapter Saving station presetsListening to station presets Using the tunerNaming station presets Making an audio or a video recording Making recordingsMaking recordings Chapter Controlling the rest of your system Setting the remote to control other componentsSelecting preset codes directly Use the number buttons to enter the preset codeControlling the rest of your system Direct function Clearing all the remote control settingsSource  Controlling the rest of your system Controls for TVsInput SelectSHIFT+  Controlling the rest of your systemControls for other components Button s Function ComponentsDVD Shift Enter GuideCH + SHIFT+ HDD ShiftManufacturer Code Controlling the rest of your system Preset Code ListOn digital STB DVD RecorderOther connections Using XM RadioConnecting your XM Radio receiver Press XM Radio SHIFT+FM to switch to the XM Radio inputListening to XM Radio Using XM HD SurroundSaving channel presets Other connectionsConnecting your Sirius Connect Tuner Using Sirius RadioUsing the XM Menu Listening to channel presetsENTER.3 Press Sirius SHIFT+AM to switch to the Sirius inputListening to Sirius Radio One at time withPress TOP Menu Use Using the Sirius MenuPress You wantBi-amping your front speakers Other connections Second Zone speaker B setupSwitching the speaker system Below are for the Second Zone setting only.1Bi-wiring your speakers Assigning the digital inputs Other SettingsOther Settings Chapter Input Assign menuDynamic Range Control Setup Other SettingsOther Setup menu Select ‘LFE ATT Setup’ from the Other Setup menu Dual Mono SetupLFE Attenuator Setup Select ‘Dual Mono Setup’ from the Other Setup menuAdditional information Chapter TroubleshootingProblemRemedy Additional informationAdditional information Problem RemedySirius radio messages Symptom Cause ActionXM radio messages OK? shows in the display Additional information Resetting the main unitSwitching the speaker impedance Press Setup to confirmAdditional information Specifications Miscellaneous Power cord cautionCleaning the unit AM Tuner SectionTo establish a safe level We Want You Listening For a LifetimeLimited Warranty Pioneer Corporation