Pioneer VSX-817-S/-K Other Settings Chapter, Input Assign menu, Assigning the digital inputs

Other Settings

Chapter 11:

Other Settings

The Input Assign menu

You only need to make settings in the Input Assign menu if you didn’t hook up your digital equipment according to the default settings for the digital inputs, or if you have connected equipment using component video cables.

1Press RECEIVER on the remote control, then press the SETUP button.

An on-screen display (OSD) appears on your TV. Use /// and ENTER on the remote

control to navigate through the screens and select menu items. Press RETURN to confirm and exit the current menu.

2Select ‘Input Assign’ from the System Setup menu.

System Setup				5.Input Assign
	1.Surr	Back System
					a.Digital Input
	2.Auto	MCACC			b.Component Input
	3.Manual		MCACC
	4.Manual		SP Setup
	5.Input	Assign
	6.Other	Setup
			: Exit		:Return

Assigning the digital inputs

•Default settings: Coaxial - 1 – DVD

Coaxial - 2 – DVR

Optical - 1 – CD

Optical - 2 – TV

You only need to do this if you didn’t hook up your digital equipment according to the default settings for the digital inputs (see above). This setting tells the receiver what digital equipment is hooked up to which terminal so the buttons on the remote correspond to what you have hooked up.

1Select ‘Digital Input’ from the Input Assign menu.

11

								English
	5.Input Assign			5a.Digital	Input	Setup
		a.Digital Input		Coaxial–1		DVD		Deutsch
		:Return			[	DVR	:Finish
		b.Component Input		Coaxial–2			]
				Optical–1	[	CD	]
				Optical–2	[	TV	]
2 Select the number of the digital input to
which you’ve connected the digital component.								Français
The numbers correspond with the numbers
beside the inputs on the back of the receiver.
3 Select the component that corresponds
with the one you connected to that input.
Select between DVD, TV, CD, CDR, DVR,
								Italiano
SIRIUS or OFF.
• Use / and ENTER to do this.
• If you assign a digital input to a certain
function (for example, DVD/LD) then any
digital inputs previously assigned to that
								Nederlands
function will automatically be switched off.
4 When you’re finished, press RETURN.
You return to the Input Assign menu.
Assigning the component video inputs
• Default settings:								Español
Component 3 – DVR
Component 1 –			DVD

Component 2 – TV

If you used component video cords to connect your video equipment you must tell the receiver which device it is, or else you may see the S- video or composite video input instead of the component video signal. For more on this, see Using the component video jacks on page 16.

1Select ‘Component Input’ from the Input Assign menu.

5. Input Assign		5b.Component	Input
	a.Digital Input	Component–1
				DVD
	b.Component Input	Component–2	[	TV	]
		Component–3	[	DVR	]
	:Return			:Finish

59

En