Output, Receiver Level Control, DC Input

10	8	9	11			PIN 1		PIN 3

Balanced Audio Output Jack: TA3M-type connector. Pin 1: ground (shield); Pin 2: “audio +”;				7	Output
				7	Output
Pin 3: “audio –”.A standard 2-conductor shielded cable can be used to connect the receiver
output to a balanced microphone-levelinput on a camera, mixer or integratedamplifier.
							PIN 2
							PIN 2
Controls the output level of the receiver.Turnclockwiseto increase output level.				8	Receiver Level Control

The level control (volume control) for headphones is independent of other level controls. Turn to				9	Monitor Level Control
the right to increase output (turn up the volume).

You may connect the unit to an external power supply (12V DC source, 500 mA nominal				10	DC Input
current, not included.)

3.5 mm TRS headphone jack.				11	Monitor Output

Output