Quick Overview of System Operation

Thank you for purchasing this Audio-Technica1800 Series Single-channel Camera-mount

UHF Wireless Microphone System. All 1800 Series Single-channel systems are designed primarily to be used with video cameras, with the ATW-R1810 Receiver mounted on a camera and connected to the camera's audio input; they may also be used with other components equipped with microphone-level input.

First, insert batteries. (See Receiver Battery Installation, page 8.) Note:The ATW-R1810Single- channel Receiver also functions without batteries if connected to an external power sup- ply (12V DC source, 500 mA nominal current, not included).

Next, attach the antennas to the antenna input jacks, and mount the ATW-R1810 Receiver to your camera (mounting hardware not included); or use the included pouch with belt clip to attach the ATW-R1810 to your belt. Connect the output cable to the ATW-R1810 and your video camera (or audio mixer). (See Output callout, page 7 ).

Turn the ATW-R1810on: Press and hold the Power/Set button until the Power LED lights red.

Select an operating frequency. (See Selecting Frequencies on your Receiver, page 9.)

NOTE:Transmitter-Receiverpairs must be set to identical frequencies.

IF your system is equipped with a UniPak® Body-packTransmitterand lavalier microphone:

Plug the included lavalier microphone into the UniPak® body-pack transmitter and position microphone on your subject about six inches below the chin. Anticipate movements that may cause the microphone to rub against or be covered by clothing, and position the microphone to avoid it. Turn the power on (See Operating the Transmitter, page 11). Select a frequency and choose other settings. (See Operating the Transmitter and How to Set Frequencies on your

Transmitter,page 11.)

IF your system is equipped with a Plug-onTransmitter:Attach a microphone (dynamic or con-

denser) to the Plug-on Transmitter's input connector (See Microphone Input, page, 10 ). Turn

the power on (See Operating theTransmitter,page 11 ). Select a frequency and choose other set-

tings. (See Operating the Transmitterand How to Set Frequencies on your Transmitter,page 11.)