Mackie DX810 instruction manual Table of Contents

Page 2

CAUTION AVIS

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED PERSONNEL

ATTENTION: POUR EVITER LES RISQUES DE CHOC

ELECTRIQUE, NE PAS ENLEVER LE COUVERCLE. AUCUN

ENTRETIEN DE PIECES INTERIEURES PAR L'USAGER. CONFIER

L'ENTRETIEN AU PERSONNEL QUALIFIE.

AVIS: POUR EVITER LES RISQUES D'INCENDIE OU D'ELECTROCUTION, N'EXPOSEZ PAS CET ARTICLE A LA PLUIE OU A L'HUMIDITE

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure, that may be

of sufficient magnitude to constitute a risk of electric shock to persons.

Le symbole éclair avec point de flèche à l'intérieur d'un triangle équilatéral est utilisé pour alerter l'utilisateur de la présence à l'intérieur du coffret de "voltage dangereux" non isolé d'ampleur suffisante pour constituer un risque d'éléctrocution.

The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Le point d'exclamation à l'intérieur d'un triangle équilatéral est employé pour alerter les utilisateurs de la présence d'instructions importantes pour le fonctionnement et l'entretien (service) dans le livret d'instruction accompagnant l'appareil.

1. SAFETY INSTRUCTIONS

1.Read Instructions — Read all the safety and operation instructions before operating the DX810.

2.Retain Instructions — The safety and operating instructions should be kept for future reference.

3.HEED ALL WARNINGS — Follow all warnings on the DX810 and in these operating instructions.

4.FOLLOW ALL INSTRUCTIONS — Follow all operating and other instructions.

5.Water and Moisture — Do not use the DX810 near water – for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool, etc.

6.Ventilation — This DX810 should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug, or similar surface that may block any ventilation openings, or placed in a built-in installation such as a bookcase or cabinet that may impede the flow of air through ventilation openings.

7.Heat — Locate the DX810 away from heat sources such as radiators, or other devices which produce heat.

8.Power Sources — Connect the DX810 to a power supply only of the type described in these operation instructions or as marked on the rear panel. If using an external DC power supply or battery pack, be sure the voltage corresponds to the range indicated on the rear panel, and that it is connected with the correct polarity.

9.Power Cord Protection — Route power supply cords so that they are not likely to be walked upon or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit the DX810.

10.Object and Liquid Entry — Do not drop objects into or spill liquids into the inside of the DX810.

11.Damage Requiring Service — The DX810 should be serviced only by qualified service personnel when:

A.The power-supply cord or the plug has been damaged; or

B.Objects have fallen, or liquid has spilled into the DX810; or

C.The DX810 has been exposed to rain; or

D.The DX810 does not appear to operate normally or exhibits a marked change in performance; or

E.The DX810 has been dropped, or its chassis damaged.

12.Servicing — The user should not attempt to service the DX810 beyond those means described in this operating manual. All other servicing should be referred to the Mackie Service Department.

13.To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

Pour prévenir les chocs électriques ne pas utiliser cette fiche polariseé avec un prolongateur, un prise de courant ou une autre sortie de courant, sauf si les lames peuvent être insérées à fond sans laisser aucune pariie à découvert.

14.Grounding or Polarization — Precautions should be taken so that the grounding or polarization means of the DX-810 is not defeated.

15.This apparatus does not exceed the Class A/Class B (whichever is applicable) limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications.

ATTENTION —Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant las limites applicables aux appareils numériques de class A/de class B (selon le cas) prescrites dans le règlement sur le brouillage radioélectrique édicté par les ministere des communications du Canada.

WARNING — To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION — Internal lithium battery.

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

TABLE OF CONTENTS

 

1. SAFETY INSTRUCTIONS

2

2.

INTRODUCTION

3

 

KEY FEATURES

4

 

FRONT PANEL FEATURES

4

 

REAR PANEL FEATURES

5

 

SIGNAL-FLOW DIAGRAM

6

3.

INSTALLATION

7

 

APPLICATION DIAGRAMS

7

 

Connections

12

 

AC Power Considerations

13

4.

OPERATION

14

 

Quick Start

14

 

Using the Digital Signal Processors

15

 

Using the BUS A and B Inputs

15

 

Using the RECORD Output

16

 

OUTPUTS A and B

16

 

Using the REMOTE BUS Connection

16

 

Using the LOGIC I/O

16

 

Front Panel Lock

17

 

Upgrading the Software

17

5. DX-10E-PC SOFTWARE (v 1.00)

18

 

Installing the Software

18

 

Connecting a PC

18

 

Overview

18

 

Menu Bar

19

 

Button Section

22

6.

SPECIFICATIONS

30

 

DX810 Block Diagram

30

 

DX810 Specifications

31

7.

Service Information

33

Appendix A: Logic Input Functions

34

Appendix B: Logic Output Functions

34

Appendix C: Selection Remote Predefined Functions

34

Appendix D: Level Remote Predefined Functions

35

Image 2
Contents Trim Comm PortDirect Outputs Logic I/O Remote BUS Comm PortTable of Contents KEY Features IntroductionAudio Equipment Front Panel FeaturesListed Commercial LineRear Panel Features InputsAIN BUS BDX-810 Application Courtroom System InstallationApplication Diagrams Typical Community Center Application DX810 in Church Application DX-10E-PC Application Laptop with Microphone Input Remote ControlsDX810/DX-10E Application 8-Track Recording with 2-Track Mix Applications DX810/DX-10E Application Track Recording with 2-Track MixConnections Connecting the Remote BUS AC Power ConsiderationsConnecting the Logic I/O Make the Connections OperationQuick Start Start UpBus a and B Input Trim Using the Digital Signal ProcessorsUsing Inputs Plug-InsUsing the Logic I/O Using the BUS a and B InputsUsing the Record Output Outputs a Through JLogic Inputs Front Panel LockUpgrading the Software Logic OutputsInstalling the Software OverviewFile Top SectionMenu Bar EditWindows Indicators/Presets/Control

DX810 specifications

The Mackie DX810 is a versatile mixer designed for both live sound and studio applications, combining intuitive operation with a host of advanced features. This compact device, with its robust design, is perfect for musicians, sound engineers, and content creators alike, making it an essential tool for any audio setup.

One of the key features of the DX810 is its ten channels, which provide ample space for connecting multiple audio sources. Each channel comes equipped with a 3-band EQ, allowing users to tailor the sound to their specific needs. The built-in effects processor further enhances audio flexibility, offering a range of reverb and delay options. This makes it easier to create professional-quality soundscapes without the need for external equipment.

The Mackie DX810 also includes a feature called "Built-In USB Recording." This allows users to easily record their performances or practice sessions directly to a computer, streamlining the workflow for musicians and producers. Coupled with its low-latency monitoring capabilities, the DX810 is ideally suited for both live performances and studio recording.

Extensive connectivity options are another highlight of the DX810. With XLR, TRS, and RCA input outputs, it facilitates the integration of various audio sources, including microphones, instruments, and external effects units. The mixer also supports phantom power, enabling the use of condenser microphones, which is crucial for capturing high-quality vocals and acoustic instruments.

The DX810 is designed with ease of use in mind. Its layout features clearly labeled knobs and faders, ensuring that adjustments can be made quickly, even in high-pressure situations. The bright LED indicators provide visual feedback, allowing sound engineers to monitor levels effectively and avoid clipping.

Additionally, the robust construction of the DX810 ensures reliable performance in diverse environments, from intimate venues to large-scale events. Its portable design means that it can be easily transported, making it a favored choice for mobile sound engineers and gigging musicians.

In summary, the Mackie DX810 is packed with features designed to meet the needs of modern audio professionals. With its impressive channel count, built-in effects, recording capabilities, and solid build quality, it stands out as an essential mixer for anyone looking to enhance their sound experience. Whether in a studio or on stage, the DX810 delivers exceptional performance and flexibility.