Introduction, KEY Features | Mackie DX810 specs

2. INTRODUCTION

The DX810 is our popular DX8 stereo digital audio mixer with the DX10e Expansion Kit installed. This adds eight more balanced outputs and converts it into a powerful matrix mixer/processor. It is designed for use in a variety of installations such as churches, courtrooms, convention centers, and hotels. With eight inputs, ten outputs, and a toolbox full of DSP, the DX810 fits most any installed sound reinforcement application.

Each of the 10 outputs represents a discrete mix of the eight inputs, resulting in a true 8x10 mixing matrix with virtual faders at each crosspoint. It has the ability to group any combination of gain elements to one of 32 groups.

A new software interface provides intuitive setup and operation via a PC. Third-octave and five- band parametric EQs are provided on each output. There is also a three band sweepable high and low shelving EQ with a fully parametric mid-range control on each input.

The processing power provided by the DX810 permits inserting a gate on each input, as well as a compressor on each input and output. It also permits inserting signal delay on each output, and creating crossover groups with custom high, low, or bandpass filters applied to each output. Up to five outputs can be assigned to a crossover group.

Each of the eight input channels is terminated to two Phoenix-type detachable connectors. Each connector is optimized to accept either microphone or line-level signals. Microphone preamplifiers utilize Mackie’s proprietary XDR™ technology to offer studio-class audio performance. Phantom power of 48 VDC is switchable individually on each input. Two auxiliary line-level inputs with trim are provided, allowing analog signals to be mixed with the A and B master mixes. All main outputs deliver balanced line-level signals to detachable Phoenix-type connectors. The main A and B outputs also deliver buffered unbalanced signals to RCA connectors intended for recording.

The DX810 offers an intuitive front panel user interface for the A and B outputs. It consists of dual-function LED bar graph meters for each input and the A and B outputs. Input meters indicate the presence of signal before signal processing (pre- fader). Output meters indicate the actual level at output (post-fader). Levels are set by means of UP/ DOWN pushbuttons dedicated to each input and output. A MODE button is used to select between Mix A and B. This allows adjustment of levels to both mix outputs from the same set of input

Part No. 0001335 Rev. A1 03/02

controls. A third function of the MODE button allows the user to LOCK the front panel controls until a security unlock code is entered.

The DX810 offers flexible interface options through dedicated inputs and outputs for control and programming purposes. Two independent RS232 connectors are provided, one on the front panel and one on the rear, for connection to a computer or control system. A multi-pin (DB25F) connector on the rear panel allows interface among the 10 Logic Inputs and 10 Logic Outputs. This interface connects to switches, LEDs, and other devices, enabling hardware control and indication from custom control panels. All logic inputs and outputs are programmable in software. A proprietary remote control bus allows connection of the optional wired remotes over three-conductor cable. Remotes are available in Volume Control (DX-RVC) and 4-Switch (DX-SW4) versions and may be combined in any configuration.

The DX810 is supplied with DX-10E-PC software that allows access to all of the system’s settings and configurations. The software provides access to the 3-band input EQ, 31-band graphic EQ, compres- sors, gates, delays, and crossover configuration. In addition, it allows saving and recalling up to 32 presets, configuration for 32 control groups, for input force on/force off functions with priority, and for the logic input and output connections. All settings and text labels are retained in the DX810 as well as stored on the computer's local drive.

The DX810 is UL and CE approved and designed for continuous use in professional fixed installation systems. An internal auto-ranging power supply allows connection to mains voltages from 90-240 VAC at 50/60 Hz. This is without requiring jumper or switch setting changes. A 24 VDC input is provided for applications where backup power is required. Switchover to backup power is automatic and silent.

KEY FEATURES

•32-bit DSP and 24-bit Analog/Digital Conversion

•8 balanced XDR™ Mic/Line inputs with trim

•2 balanced Line inputs direct to mix buses A and B

•10 Independent Mix Buses and balanced Outputs

•2 unbalanced Record Outputs

•8 unbalanced Direct Channel Outputs

•Individual Level/Peak (PPM) metering on each Input

DX810 – 3

DX810 specifications

The Mackie DX810 is a versatile mixer designed for both live sound and studio applications, combining intuitive operation with a host of advanced features. This compact device, with its robust design, is perfect for musicians, sound engineers, and content creators alike, making it an essential tool for any audio setup.

One of the key features of the DX810 is its ten channels, which provide ample space for connecting multiple audio sources. Each channel comes equipped with a 3-band EQ, allowing users to tailor the sound to their specific needs. The built-in effects processor further enhances audio flexibility, offering a range of reverb and delay options. This makes it easier to create professional-quality soundscapes without the need for external equipment.

The Mackie DX810 also includes a feature called "Built-In USB Recording." This allows users to easily record their performances or practice sessions directly to a computer, streamlining the workflow for musicians and producers. Coupled with its low-latency monitoring capabilities, the DX810 is ideally suited for both live performances and studio recording.

Extensive connectivity options are another highlight of the DX810. With XLR, TRS, and RCA input outputs, it facilitates the integration of various audio sources, including microphones, instruments, and external effects units. The mixer also supports phantom power, enabling the use of condenser microphones, which is crucial for capturing high-quality vocals and acoustic instruments.

The DX810 is designed with ease of use in mind. Its layout features clearly labeled knobs and faders, ensuring that adjustments can be made quickly, even in high-pressure situations. The bright LED indicators provide visual feedback, allowing sound engineers to monitor levels effectively and avoid clipping.

Additionally, the robust construction of the DX810 ensures reliable performance in diverse environments, from intimate venues to large-scale events. Its portable design means that it can be easily transported, making it a favored choice for mobile sound engineers and gigging musicians.

In summary, the Mackie DX810 is packed with features designed to meet the needs of modern audio professionals. With its impressive channel count, built-in effects, recording capabilities, and solid build quality, it stands out as an essential mixer for anyone looking to enhance their sound experience. Whether in a studio or on stage, the DX810 delivers exceptional performance and flexibility.