Saving a performance, After editing a sound

Editing sounds and performances > Saving a performance

Saving a performance

There are three ways to save a performance. Please find them below.

6.Use the sound selection buttons (including the VARIA- TION button) to select the location where you want to save your performance.

After editing a sound

1.If you entered Sound edit mode with the PERFORMANCE indicator turned off (Sound mode), after modifying some- thing and pressing EXIT, the Sound Modified page (seen above) will appear:

1	2	3	4	5
6	7	8	9	10

Sound Modified

Save? (Yes/No)

While in this page, the PERFORMANCE indicator will start ﬂashing.

PERFORMANCE button and LED indicator

2.Press the PERFORMANCE button to save the current sound or sound combination into a performance. After you press the button, the Performance Name page appears:

Performance Name

JazzCombo To

Flashing character

3.If you want, edit the performance name. A performance’s name can be up to 10 characters long.

Use the SCROLL buttons to select the character to be edited (it is ﬂashing). Use the +/YES and -/NO buttons to change it. Press the SCROLL / buttons together to insert a new character, or the +/YES and -/NO buttons together to delete the character at the cursor’s position.

4.When you reach the end of the name, pressing SCROLL moves the cursor to the To command:

Performance Name

JazzCombo To

5.Press the +/YES button to go to the Save To Performance page:

Save To: Perf 01

JazzCombo Save?

Here is the table of the Performance’s locations:

			Performance #
Button
Button		Bank 1	Bank 2	Bank 3
		Bank 1	Bank 2	Bank 3

1	(PIANO 1)	01	11	21

2	(PIANO 2)	02	12	22

3	(E.PIANO 1)	03	13	23

4	(E.PIANO 2)	04	14	24

5	(HARPSI/CLAV)	05	15	25

6	(VIBES/GUITAR)	06	16	26

7	(ORGAN1)	07	17	27

8	(ORGAN2)	08	18	28

9	(STRINGS/CHOIR)	09	19	29

10 (BASS)		10	20	30

7.The location number appears in the top right corner of the display, while the name of the performance already stored at that location appears in the lower left corner:

Target location number

Save To: Perf.01

Split&Lay Save?

Name of the performance at the target location

8.Press the +/YES button to save the performance into the selected location, or the EXIT button to return to the Main page without saving, with the last performance still select- ed. If you press +/YES, the “Are you sure?” message ap- pears.

Are you sure?

Korg C-720 Saving a performance, After editing a sound, Press +/YES to conﬁrm, -/NO to cancel