Korg C-720 Windows Installing the Korg USB-MIDI Driver, Mac OS X Installing Korg USB-MIDI Driver

Page 62

Installing the Korg USB MIDI Driver > Windows: Installing the KORG USB-MIDI Driver

Windows: Installing the KORG USB-MIDI Driver

Please connect the C-720 to the computer via an USB cable only after having installed the KORG USB-MIDI Driver Tools.

Warning: C-720 cannot use the KORG MIDI Data Filer at the same time.

Note: You must install a separate driver for each USB port you will use.

1.Insert the included CD-ROM into your CD-ROM drive.

Normally, the “Digital Piano Application Installer” will start up automatically.

If your computer is set so that the installer does not run automatically, double-click “KorgSetup.exe” on the CD- ROM.

2.Please follow the installation instructions appearing on- screen.

3.Restart the computer, and turn on the C-720. Connect the C-720 to the computer via an USB cable.

4.Select the following command from the task bar to open the installation instructions:

Start > all programs > KORG > KORG USB-MIDI Driver Tools > Installation manual

5.Select the following command from the task bar to open the installation program:

Start > all programs > KORG > KORG USB-MIDI Driver Tools > Install KORG USB-MIDI Device

6.Please follow the installation instructions appearing on- screen to install the KORG USB-MIDI Driver.

Driver’s ports

After installation, the following ports will be shown in you MIDI application (e.g., sequencer) among the other MIDI de- vices:

C720 KEYBOARD: This allows for reception of MIDI messag- es from the C-720 (keyboard and controller’s data) to the MIDI application running on the computer.

C720 SOUND: This allows for transmission of MIDI messages from the MIDI application running on the computer, to the internal tone generator of the C-720.

Mac OS X: Installing KORG USB-MIDI Driver

1.Insert the included CD-ROM into your CD-ROM drive.

2.Please double click on the “KORG USB-MIDI Driver.pkg” in the “KORG USB-MIDI Driver” folder inside the CD- ROM, to run the installer. Install it according to the in- structions appearing on-screen.

C720 KEYBOARD: This allows for reception of MIDI messag- es from the C-720 (keyboard and controller’s data) to the MIDI application running on the Mac.

C720 SOUND: This allows for transmission of MIDI messages from the MIDI application running on the Mac, to the internal tone generator of the C-720.

Driver’s ports

After installation, the following ports will be shown in you MIDI application (e.g., sequencer) among the other MIDI de- vices:

60

Image 62
Contents User’s Manual Page Important Safety Instructions Data Reset Contents Main features IntroductionTwo sets of headphones Adjustable pitchPowerful integrated amplification TemperamentsControl panel Performance buttonChorus Connections Connecting other audio devices to the C-720 Connecting to external audio devicesConnecting to an external amplification system Amplification, connect only the L/MONO output. Do not conOpen the key cover Using the music standBefore you begin Turning the instrument onListening to the Demo Adjusting the volumeUsing the headphones Listen to a specified songBefore you begin Listening to the Demo Basic functions Playing a single sound Single modeWhen you turn the instrument on, it is in Single mode GrandPiano 4/4Playing two sounds at the same time Layer mode Selecting a different Left sound Entering the Split modeExit from the Split mode Choosing a different split pointUsing the pedals TransposingPress the Transpose button to show the Transpose dis- play Changing the brillianceTurning the effects on/off Transpose +02 semitonesPerf.01 4/4 Split&Layr Using performancesChoosing performances Performance Button BankPiano&Str Ac. Bass Changing the sounds assigned to a performanceEditing a performance Metronome Starting and stopping the metronome, adjusting the tempoAdjusting the tempo Tempo and time signature displayPress the Exit button to return to the Main Choosing a time signatureDrum patterns Metro TS/TempoSaving the metronome settings Adjusting the metronome levelAdjusting the drum pattern’s reverb Selecting the accentPlaying back a song Accessing the Song Play modeHow to select a song After you press the Song button, the Song Play page appearsAlbumSongBook 01-Prelude Prelude 1 M--- 4/4 How to start playbackStarting from a different measure After having selected a song, you can play it backPlay along with the song Muting/unmuting a recorder’s partChanging the song’s tempo Cycle Play Turning the Cycle Play offEntering Record mode with a new, blank song Quick recording procedureEntering the Record mode Entering Record mode with an existing user songSelecting sounds Setting the record options Recording with no metronome Setting the time signature and tempoRecording Recording with the metronomeRecordUntitled M099 4/4 Second-pass recordingChanging sounds to a recorded song RecordUntitled M--- 4/4Changing tempo to a recorded song Record Mode Pedal PunchRecord Mode Pnc S001 E001 Pedal Punch recordingBy choosing to record a new song By choosing the Save Song commandSaving the song By choosing a different songErasing a track Setting Cycle PlayEditing a song Play mode, whose use has been seen above see Cycle Play onCut Measures From 99 Exec? Cutting measures at the end of the songQuantizing the song Quantize Q1/16 Exec?Saving the song after editing Transposing the songDeleting the song Choose a transposition value in semitonesEditing a song Saving the song after editing Editing sounds and performances Accessing the Sound edit modeExit from the Sound edit mode Saving a soundAfter editing a sound Press +/YES to confirm, -/NO to cancelSaving a performance Press the +/YES button to go to the Save To PerformanceUse this page to set each sound’s volume Setting the volumeAdjusting the panning After editing a performanceC-720 is equipped with three types of effects Adjusting the effectsSetting the reverb effect Press Scroll again to select the Reverb On/Off pa- rameterIf you are in Layer or Split mode, press Scroll Setting the chorus or modulation effectSetting the insert effects Use the +/YES and -/NO buttons to select a different effectOctave +02 L+00 Setting the octave transpositionIFX Wet/Dry MW099 LD020 To select the L Layer/Left parameterAdjusting the fine tune Programming the pedalsWith the M Main parameter selected Selecting a scaleSubScale Type Kirnberger SubScale Sw MOn LOffResetting the current sound and performance Reset Snd/Prf Exec?Accessing Global edit Global settingsTouch settings Exit from the Global edit modeBrilliance Master tuningDefault split point Assigning functions to the pedals Pedal 3 Glob Sound Pedal 2 Glob Sound Pedal 1 Glob SoundMute Level Quarter Tone SubScale realtime programmingFast Play Use the +/YES and -/NO button to choose the mute levelMidi in Channels Turning the keyboard on or off Local ControlMidi Clock Midi in Ch Ch01 Tr01 Midi OUT ChannelsPress the Scroll Button to move the cursor to Channel again Button to show the Midi OUT ChannelsTus of the selected filter Midi FiltersData transfer via the USB port On a Mac Drag the Korg SSD icon over the Eject icon Folder ContentErasing songs from the User Song album Erase Song Prelude Exec?System version number General ResetGeneral Reset Exec? Yes/No You can see the operating system’s version number whileWhat can you do with MIDI? What is MIDI?What is Midi Over USB? Midi connectionsProgram Change Standard Midi settingsUsing the C-720 as a multitimbral tone generator Control Change enable/disable Control ChangeKorg USB-MIDI Driver system requirements Installing the Korg USB Midi DriverConnecting the C-720 to a personal computer Please note before useDriver’s ports Windows Installing the Korg USB-MIDI DriverMac OS X Installing Korg USB-MIDI Driver Assembling the stand Fasten the two pieces using two screws a Assembling procedureFor assembly By inserting the four bolts on the front of the pedalAssembling the stand Assembling procedure Assembling the stand Assembling procedure Remove Left Speaker Right Speaker Pedals Screw loosening Check after assemblyDisassembly Var Name CC32 Osc Description AppendixSounds Var. Name CC 0 CC32 PC* Osc. Description Drum Kits Selected only by Drum Patterns or via MidiBtn Name Sounds / Timbres Mode Remarks Bank PerformancesEffects Reverb Description / Beschreibung ChorusAlbum Classics Title Composer SongsAlbum SongBook Title Composer Page Error messages Polyphony TroubleshootingProblem Possible remedy Technical specifications Specifications 720Midi Implementation Chart RPN LSB, MSBPage Page Korg Italy 2006. All rights reserved

C-720 specifications

The Korg C-720 is a sophisticated digital piano that embodies the pinnacle of modern musical technology and artistry. Designed to meet the needs of both aspiring musicians and seasoned professionals, the C-720 combines exceptional sound quality, advanced features, and an elegant design.

At the heart of the C-720 is Korg's Enhanced Piano Sounds technology, which provides a rich and authentic sound experience. The instrument boasts a comprehensive selection of meticulously sampled grand pianos, electric pianos, and other keyboard instruments. Each sound has been crafted using advanced sampling techniques that capture the nuance and character of the original instruments. The C-720 also features Korg's Dynamic Touch technology, allowing for responsive playing that adapts to the touch of the performer, enabling subtle expression through dynamics.

One of the standout features of the C-720 is its Natural Weighted Hammer Action (NH) keyboard. This keyboard action delivers the genuine feel of an acoustic piano, with weighted keys that respond appropriately to both soft and powerful playing. Coupled with the sound engine, this results in a performance experience that closely mimics traditional pianos.

Additionally, the C-720 is equipped with a sophisticated digital effects processor. This processor includes a variety of effects such as reverb, chorus, and delay, which can enhance the overall sound and provide depth to performances. The vast array of customizable settings allows musicians to craft their unique soundscapes, whether they are performing in a live setting or recording in a studio.

Connectivity options are ample in the C-720, with MIDI in/out slots for interfacing with other instruments and computers, as well as USB connectivity. This allows for easy integration into music production environments, making it a versatile choice for modern musicians. The built-in speakers deliver a full-bodied audio experience, while headphone outputs provide for private practice.

The Korg C-720 also includes a range of onboard features such as metronome, recording and playback functions, and various built-in music styles, providing musicians with tools to enhance their practice and performance. Its elegant design, available in classic wood finishes, ensures that it will be a beautiful addition to any music room or stage setup.

Overall, the Korg C-720 is a powerful and sophisticated digital piano that caters to the demands of today's musicians, combining traditional playing feel with cutting-edge technology and features.