Korg C-720 user manual Setting the volume, Adjusting the panning, After editing a performance

Page 42

Editing sounds and performances > Setting the volume

After editing a performance

1.If you entered Sound edit mode with the PERFORMANCE indicator turned on (Performance mode), after modifying something and pressing EXIT, the Perf Modified page will appear:

Perf.Modified

Save? (Yes/No)

2.While this page is shown, press the +/YES button to save the changes into a performance. After you press the but-

ton, the Save To Performance page (seen above) will ap- pear. You will be able to save the current sound or sound combination into a performance. (See procedure above.)

By pressing the Performance button

While in the Main page, keep the PERFORMANCE button pressed. The Performance Name page (seen above) will ap- pear. You will be able to save the current sound or sound com- bination into a performance. (See procedure above.)

Setting the volume

Use this page to set each sound’s volume.

Note: If you return to editing later, you might see a different

edit page instead of the first one. Use the SCROLL

button to

reach it.

 

1.After having pressed the EDIT button, the Volume page will appear:

Volume 1

M:127 L:120

2.While the Main (M) part is selected, use the +/YES and -/ NO buttons to select a different value.

Value

Meaning

 

 

0

Minimum – no sound

 

 

127

Maximum – very loud

 

 

3.If you are in Layer or Split mode, press the SCROLL button to select the L (Layer/Left) parameter (only avail- able in Layer or Split mode):

Volume 1

M:127 L:120

4.While the Layer/Left (L) part is selected, use the +/YES and -/NO buttons to select a different value.

5.Press the EXIT button to return to the Main page and save the changes (see “Exit from the Sound edit mode” on

page 38), or the SCROLL button to go to the next edit page (see below).

Adjusting the panning

Panning is the position of each part in the stereo front (or “panorama”).

1.After having pressed the EDIT button, use the SCROLL button to go to the Pan edit page, with the M (Main) pa- rameter selected:

Pan2

M:R07 L:L07

While the Main (M) part is selected, use the +/YES and -/ NO buttons to select a different value.

Value

Meaning

 

 

L64

Hard Left

 

 

C00

Center

 

 

R63

Hard Right

 

 

2. If you are in Layer or Split mode, press SCROLL again to go to select the L (Layer/Left) parameter (only available in Layer or Split mode):

Pan2

M:R07 L:L07

3.While the Layer/Left (L) part is selected, use the +/YES and -/NO buttons to select a different value.

4.Press the EXIT button to return to the Main page and save the changes (see “Exit from the Sound edit mode” on

page 38), or the SCROLL button to go to the next edit page (see below).

40

Page 41 Page 43
Image 42
Page 41 Page 43
Contents User’s Manual Page Important Safety Instructions Data Reset Contents Main features IntroductionTwo sets of headphones Adjustable pitchPowerful integrated amplification TemperamentsControl panel Performance buttonChorus Connections Connecting other audio devices to the C-720 Connecting to external audio devicesConnecting to an external amplification system Amplification, connect only the L/MONO output. Do not conOpen the key cover Using the music standBefore you begin Turning the instrument onListening to the Demo Adjusting the volumeUsing the headphones Listen to a specified songBefore you begin Listening to the Demo Basic functions Playing a single sound Single modeWhen you turn the instrument on, it is in Single mode GrandPiano 4/4Playing two sounds at the same time Layer mode Selecting a different Left sound Entering the Split modeExit from the Split mode Choosing a different split pointUsing the pedals TransposingPress the Transpose button to show the Transpose dis- play Changing the brillianceTurning the effects on/off Transpose +02 semitonesPerf.01 4/4 Split&Layr Using performancesChoosing performances Performance Button BankChanging the sounds assigned to a performance Editing a performancePiano&Str Ac. Bass Metronome Starting and stopping the metronome, adjusting the tempoAdjusting the tempo Tempo and time signature displayPress the Exit button to return to the Main Choosing a time signatureDrum patterns Metro TS/TempoSaving the metronome settings Adjusting the metronome levelAdjusting the drum pattern’s reverb Selecting the accentPlaying back a song Accessing the Song Play modeHow to select a song After you press the Song button, the Song Play page appearsAlbumSongBook 01-Prelude Prelude 1 M--- 4/4 How to start playbackStarting from a different measure After having selected a song, you can play it backMuting/unmuting a recorder’s part Changing the song’s tempoPlay along with the song Cycle Play Turning the Cycle Play offEntering Record mode with a new, blank song Quick recording procedureEntering the Record mode Entering Record mode with an existing user songSelecting sounds Setting the record options Recording with no metronome Setting the time signature and tempoRecording Recording with the metronomeRecordUntitled M099 4/4 Second-pass recordingChanging sounds to a recorded song RecordUntitled M--- 4/4Changing tempo to a recorded song Record Mode Pedal PunchRecord Mode Pnc S001 E001 Pedal Punch recordingBy choosing to record a new song By choosing the Save Song commandSaving the song By choosing a different songErasing a track Setting Cycle PlayEditing a song Play mode, whose use has been seen above see Cycle Play onCut Measures From 99 Exec? Cutting measures at the end of the songQuantizing the song Quantize Q1/16 Exec?Saving the song after editing Transposing the songDeleting the song Choose a transposition value in semitonesEditing a song Saving the song after editing Editing sounds and performances Accessing the Sound edit modeExit from the Sound edit mode Saving a soundAfter editing a sound Press +/YES to confirm, -/NO to cancelSaving a performance Press the +/YES button to go to the Save To PerformanceUse this page to set each sound’s volume Setting the volumeAdjusting the panning After editing a performanceC-720 is equipped with three types of effects Adjusting the effectsSetting the reverb effect Press Scroll again to select the Reverb On/Off pa- rameterIf you are in Layer or Split mode, press Scroll Setting the chorus or modulation effectSetting the insert effects Use the +/YES and -/NO buttons to select a different effectOctave +02 L+00 Setting the octave transpositionIFX Wet/Dry MW099 LD020 To select the L Layer/Left parameterAdjusting the fine tune Programming the pedalsWith the M Main parameter selected Selecting a scaleSubScale Type Kirnberger SubScale Sw MOn LOffResetting the current sound and performance Reset Snd/Prf Exec?Accessing Global edit Global settingsTouch settings Exit from the Global edit modeMaster tuning Default split pointBrilliance Assigning functions to the pedals Pedal 3 Glob Sound Pedal 2 Glob Sound Pedal 1 Glob SoundMute Level Quarter Tone SubScale realtime programmingFast Play Use the +/YES and -/NO button to choose the mute levelTurning the keyboard on or off Local Control Midi ClockMidi in Channels Midi in Ch Ch01 Tr01 Midi OUT ChannelsPress the Scroll Button to move the cursor to Channel again Button to show the Midi OUT ChannelsMidi Filters Data transfer via the USB portTus of the selected filter On a Mac Drag the Korg SSD icon over the Eject icon Folder ContentErasing songs from the User Song album Erase Song Prelude Exec?System version number General ResetGeneral Reset Exec? Yes/No You can see the operating system’s version number whileWhat can you do with MIDI? What is MIDI?What is Midi Over USB? Midi connectionsStandard Midi settings Using the C-720 as a multitimbral tone generatorProgram Change Control Change enable/disable Control ChangeKorg USB-MIDI Driver system requirements Installing the Korg USB Midi DriverConnecting the C-720 to a personal computer Please note before useWindows Installing the Korg USB-MIDI Driver Mac OS X Installing Korg USB-MIDI DriverDriver’s ports Assembling the stand Fasten the two pieces using two screws a Assembling procedureFor assembly By inserting the four bolts on the front of the pedalAssembling the stand Assembling procedure Assembling the stand Assembling procedure Remove Left Speaker Right Speaker Pedals Check after assembly DisassemblyScrew loosening Appendix SoundsVar Name CC32 Osc Description Var. Name CC 0 CC32 PC* Osc. Description Drum Kits Selected only by Drum Patterns or via MidiBtn Name Sounds / Timbres Mode Remarks Bank PerformancesEffects Reverb Description / Beschreibung ChorusSongs Album SongBook Title ComposerAlbum Classics Title Composer Page Error messages Troubleshooting Problem Possible remedyPolyphony Technical specifications Specifications 720Midi Implementation Chart RPN LSB, MSBPage Page Korg Italy 2006. All rights reserved

C-720 specifications

The Korg C-720 is a sophisticated digital piano that embodies the pinnacle of modern musical technology and artistry. Designed to meet the needs of both aspiring musicians and seasoned professionals, the C-720 combines exceptional sound quality, advanced features, and an elegant design.

At the heart of the C-720 is Korg's Enhanced Piano Sounds technology, which provides a rich and authentic sound experience. The instrument boasts a comprehensive selection of meticulously sampled grand pianos, electric pianos, and other keyboard instruments. Each sound has been crafted using advanced sampling techniques that capture the nuance and character of the original instruments. The C-720 also features Korg's Dynamic Touch technology, allowing for responsive playing that adapts to the touch of the performer, enabling subtle expression through dynamics.

One of the standout features of the C-720 is its Natural Weighted Hammer Action (NH) keyboard. This keyboard action delivers the genuine feel of an acoustic piano, with weighted keys that respond appropriately to both soft and powerful playing. Coupled with the sound engine, this results in a performance experience that closely mimics traditional pianos.

Additionally, the C-720 is equipped with a sophisticated digital effects processor. This processor includes a variety of effects such as reverb, chorus, and delay, which can enhance the overall sound and provide depth to performances. The vast array of customizable settings allows musicians to craft their unique soundscapes, whether they are performing in a live setting or recording in a studio.

Connectivity options are ample in the C-720, with MIDI in/out slots for interfacing with other instruments and computers, as well as USB connectivity. This allows for easy integration into music production environments, making it a versatile choice for modern musicians. The built-in speakers deliver a full-bodied audio experience, while headphone outputs provide for private practice.

The Korg C-720 also includes a range of onboard features such as metronome, recording and playback functions, and various built-in music styles, providing musicians with tools to enhance their practice and performance. Its elegant design, available in classic wood finishes, ensures that it will be a beautiful addition to any music room or stage setup.

Overall, the Korg C-720 is a powerful and sophisticated digital piano that caters to the demands of today's musicians, combining traditional playing feel with cutting-edge technology and features.
Top Page Image Contents