Philips TTX400 manual Maxos trapeze reflectors and optics, Emergency lighting, for TL-D only

Maxos

Maxos trapeze reflectors and optics

The sturdy trapeze reflectors for TL5 and TL-D are designed primarily for applications in industry, supermarkets and shops.They are made of steel with a white or silver outer finish.The reflectors are optimized for electrical units holding 1 or 2 TL5/TL-D lamps and provide an excellent light output ratio.

There are basic trapeze reflectors without an additional mirror inlay and trapeze reflectors with dedicated aluminum mirror inlays.These are designed for wide-beam, narrow-beam and asymmetrical wall- washing light distributions. Moreover, perforated and slotted trapeze reflectors (without mirror inlays) can be ordered for design reasons or to create an indirect uplighting effect. For glare reduction, the trapeze reflector can be equipped with a steel louver.

Emergency lighting, for TL-D only

If emergency lighting by means of separately connected orientation light units (E27-sockets) is required, special trapeze reflectors with a bigger cut-off must be used.The length of this reflector corresponds to that of the 58 W trunking length.A 36 W electrical unit plus the orientation light unit will fill this length.

	Maxos TL5		Maxos TL-D
	Trapeze reflectors and optics		Trapeze reflectors and optics
Type	4MX692 (TL5 reflector)	Type	4MX092 (TL-D reflector)
	4MX693 (TL5 louver/optic)		4MX093 (TL-D louver/optic)
Suitable electrical unit	For 1- and 2 TL5 49, 54 and 80 W versions	Suitable electrical unit	For 1 and 2 TL-D 36 and 58 W versions
Material and light	Reflector:	Material and light	Reflector:
distribution	Steel, trapeze (T)	distribution	Steel, trapeze (T)
	Steel, trapeze (T) with high gloss aluminum		Steel, trapeze (T), with high gloss aluminum
	mirror, medium beam (-MB)		mirror, wide beam (-WB)
	Steel, trapeze (T) with high gloss aluminum		Steel, trapeze (T), with high gloss aluminum
	mirror, narrow beam (-NB)		mirror, narrow beam (-NB)
	Reflector option:		Steel, trapeze (T), with high gloss aluminum
	Slotted, direct/indirect (T-S-D/I) or perforated		mirror, asymmetrical half reflector (-A)*
	(T-P)		Steel, trapeze (T), with high gloss aluminum
	Louver:		mirror, asymmetrical wallwasher (TI-A)*
	Steel lamellae, white (L-T WH)		Reflector option:
Installation	Click-in fixation on electrical unit		Slotted, direct/indirect (T-S-D/I) or perforated
Accessory	Trapeze reflector end caps (9MX056 EP1-T WH/		(T-P)
	SI)		Optic and louver:
Remarks	Reflectors and optics are suitable for 1- and 2-		Steel lamellae, white (L-T WH) or silver (L-T SI)
	lamp versions
		Installation	Click-in fixation on electrical unit
Main applications	Retail and general industry	Accessory	Trapeze reflector end caps 1 and 2-lamp version
			(9MX056 EP1-T WH/SI, 9MX056 EP2-T WH/SI)
		Remarks	* For 1-lamp version only
			Dedicated reflectors for 1- and 2-lamp TL-D
			versions
		Main applications	Retail and general industry

Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.

8.16 Light-line systems Philips indoor luminaires