Maxos standard trunking

Maxos

The trunking fulfils two functions: first, it provides a sturdy in-line mounting rail on which to fix the electrical units, and second, it provides a housing for the electrical cables that bring power to the units.All the trunking sections are made of hot-dip galvanized steel with a white or silver finish and available in lengths of 1, 2 and 3 electrical units 36 W and 58 W.

A flat ribbon cable (5 or 7 wires) or two flat ribbon cables (2 x 5 or 2 x 7 wires) are integrated in the trunking and guarantee (in combination with an integrated phase selection switch and contact blocks) safe and correct cabling.The 7-wire cable is used to integrate light regulation or emergency lighting for those electrical units that are equipped with emergency battery packs. Double wiring (2 x 5 or 2 x 7 wires) is needed to provide a completely separate mains supply to the

electrical units. Double wiring is mostly used for emergency lighting by central emergency batteries or separate switching. Hence, no extra contact blocks or wiring are required.

For suspended light-lines, the trunking sections are connected using the integrated electrical connector and a sturdy external mechanical coupling piece (accessory). Surface-mounted light-lines use the same integrated electrical connector and an internal coupler (accessory).

On the upper part of the trunking section, special knock-out openings enable cable entry wherever needed.

The trunking is available with a complete range of interchangeable components that optimize flexibility.The outstanding stability of the sections and coupling pieces allows suspension intervals of 3.4 to 5 m (TL5) / 4.8 m (TL-D).

	Maxos TL5		Maxos TL-D
	Standard trunkings		Standard trunking

Type	4MX656	Type	4MX056

Length	1 x,2 x or 3 x length of electrical unit 49 W (491,	Length	1 x, 2 x or 3 x length of electrical unit of 58 W
	492 or 493), for 80 and 35 W electrical units as		(581, 582 or 583) or 36 W (361, 362 or 363)

	well	Electrical circuit option	1 x or 2 x flat ribbon cable, 5 or 7 wires:
	1 x,2 x or 3 x length of electrical unit 54 W (541,		1 x or 2 x 5 x 1.5 or 2.5 mm² (1x5x2.5 etc)
	542 or 543)		1 x or 2 x 7 x 1.5 or 2.5 mm² (1x7x2.5 etc)

Electrical circuit option	1 x or 2 x flat ribbon cable, 5 or 7 wires:	Material	Hot-dip galvanized steel in white (WH) or silver
	1 x or 2 x 5 x 1.5 or 2.5 mm² (1x5x2.5 etc)		(SI)
	1 x or 2 x 7 x 1.5 or 2.5 mm² (1x7x2.5 etc)
	1 x or 2 x 7 x 1.5 or 2.5 mm² (1x7x2.5 etc)	Accessory	Trunking end piece and mains connection set

Material	Hot-dip galvanized steel in white (WH) or silver		(9MX056 EP SET), trunking coupling pieces etc.
	(SI)		(see chapter Maxos accessories)

Accessory	Trunking end piece, mains connection, trunking	Remarks	7-wire cable for integration of light regulation or
	coupling pieces, etc. (see chapter Maxos		emergency lighting
	accessories)		Double wiring for emergency lighting by central

Remarks	7-wire cable for integration of light regulation or		emergency batteries or separate switching
	emergency lighting
	emergency lighting
	Double wiring for emergency lighting by central
	emergency batteries or separate switching

Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.

8.22

Light-line systems

Philips indoor luminaires