Philips TTX400 manual Pre-wired Linesense unit with integrated control function, Light line

Linesense

With Linesense,TTX400 and controls are combined in one.The speed and ease of installation of TTX400 remains when Linesense is used. In addition, substantial energy savings up to 75% can be achieved. Linesense has been developed for industrial applications like warehouses.

Installation clicks only

1 ZTX400 MDU control unit clicks onto the trunking.

2 Movement detector clicks on the bracket.

3 ZTX400 MB-MDU bracket clicks on the trunking.

4 Telejack cables click the detector and control unit together. 5 ZTX400 CU mains connection clicks on the control unit.

TTX400

Light-line systems

ZTX400 MDU

Pre-wired Linesense unit with integrated control function

ZTX400 MB-MDU

Mounting bracket for

movement detector

LRM8117/00

Daylight linking Manual override		Movement detection
	Switch on/off
	or dim to		Switch on/off
	10, 20, 30%

LRM8117/00

High-bay passive infrared movement detector Mounting height up to 15 m

		Best performance	Best economy	Linesense consists of a 618 mm piece
		ZTX400 MDU HFD	ZTX400 MDU HFP	of trunking, which is fully pre-equipped
	Movement detection (detector LRM8117)			and wired to be added to the trunking.
	Minimum light level without presence	0, 10, 20, or 30%	0	The control function is integrated into
	Maximum number of presence detectors per control unit	4	2*	this extra unit, and can easily be clicked
	Maximum cable length for movement detector	300 m	125 m	between the light line and the electrical
				connection unit. High bay movement
	Daylight linking (light sensor LRL8102)		-	detectors are connected with standard
	Number of light sensors per control unit	1	-	RJ-12 cables and mounted at the right
				location with the use of dedicated
	Manual control		-	brackets. Linesense is equipped as
	(on, off and override)			standard with a telejack splitter to
				easily connect the detectors to the
	Type of ballast	HFD***	HFP	light line.
TTX	Maximum number of ballasts per line	64	**
400	TTX400 system	7 wire	5 wire

*2 presence detectors or 3 with LED disabled

**any number of luminaires allowed by the TTX400 light line system

***HFD=HFR-DALI

Philips indoor luminaires Light-line systems 8.39