Atlas Sound TSD-MIX31RL owner manual Front Panel Description

Owner’s Manual

TSD-MIX31RL

3x1 Mic/Line Mixer

Front Panel Description

7 7

6

4

5 3

7 7

12

1.Inputs Level Controls 1 and 2 - Independently adjust the gain of the input 1 and 2 input signals. Turn clockwise to increase the signal level and counter-clockwise to decrease it. Note: The Input Level Control knobs can be removed and replaced with a supplied security cover to prevent unauthorized adjustment.

2.Input Level Conrol 3 - Adjusts the gain of the input level of the input 3 stereo RCA inputs. Turn clockwise to increase the signal level and counter-clockwise to decrease it. Note: The Input Level Control knobs can be removed and replaced with a supplied security cover to prevent unauthorized adjustment.

3.Power LED - Illuminates Blue when 24VDC is present.

4.Input Peak LED - Illuminates Red when the input signal reaches 3dBV below when signal clipping will occur. Occasional flashing is normal but if this indicator is continuously On, then reduce the input level using the input level control on the front panel.

5.Signal LED - Illuminates Green when the input signal strength reaches 25mV to verify a signal path. Note: The LED will not illuminate if the input level is turned Off.

6.Limiter LED - Adjustment of the Limiter feature should be done after the input gain(s) have been properly set. Each Input should be adjusted so the Input Peak LED flashes on signal peaks and then the Output Limiter control can be set so this LED flashes to indicate that the limiter circuit is active.

7.Bracket Retainer Points - Each TSD includes two mounting brackets for securing the TSD to a cabinet or wall. Remove screws and align the bracket with the panel hole before firmly tightening the screws.

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

– 3 – AtlasSound.com

Specifications are subject to change without notice.