Operating Compact Disc Player, Inputs and Outputs

MODE:

The cassette player has three operating modes- CONTINUOUS LOOP (plays side A then side B over and over until stopped), AUTO REVERSE (plays side A, then side B and stops), NORMAL (plays side A then stops).

OPERATING COMPACT DISC PLAYER:

HANDLING THE DISCS:

Always insert a CD or CD-R into player with label side up! The TRAVEL AUDIO PRO will not play CD-R/W media. Proper handling and care of CDs should be taken to insure proper operation. Fingerprints and dust should be carefully wiped off the surface, starting from the center of the disc and moving out towards the edge. It is best to avoid touching the surface opposite the label to prevent scratching or leaving fingerprints on the surface area. Always remove disc from player before transporting unit.

NOTE: CD will play automatically when TRAVEL AUDIO PRO unit is powered on if CD is left inside CD player!!!!

LOADING AND UNLOADING DISCS:

To insert disc, gently insert into disc player slot until engagement mechanism pulls CD into player. Do not force CD into unit.

To remove disc press EJECT button and gently remove CD, place CD back into jewel case. CD can be ejected from player at any time. Player will automatically stop when CD is removed.

NORMAL DISC PLAY:

Insert CD into player and press PLAY/PAUSE button if CD hasn’t already begun to play. Disc play will start at first track.

Player display will indicate track number and time.

PAUSE:

To pause CD during play, press PLAY/PAUSE button. Play will stop immediately. To resume play, press PLAY/PAUSE button again.

STOP:

To stop play, press STOP. The disc will stop and the CD player will return to beginning of first track.

FAST FORWARD AND FAST REVERSE:

To skip forward during disc play, press and hold F-FWD.To skip back, press and hold

R-RWD.

TRACK SEARCH:

To forward to the next track, press F-FWDonce. The CD player will forward to the next track each time the button is pushed. To search for previous tracks, press R-RWD.The CD player will reverse to the next track each time the button is pushed.

REPEAT DISC PLAY:

Use the REPEAT button for repeat of a selected or programmed track or press twice to repeat all tracks or programmed tracks.

SHUFFLE:

Press the SHUFFLE button to play discs tracks randomly.

PROGRAMMED DISC PLAY:

It is not possible to enter programs during disc play.

Entering a program:

1.Press the PROGRAM button.

2.Using the TRACK button to select the track to be programmed.

3.Once desired track is selected, press the ENTER (Same as REPEAT) button.

4.Repeat 1-3 to add more selections to the program.

5.Once all selected tracks are programmed, push the PLAY button. This unit will accept a maximum of 20-programmed tracks.

6.Press the PAUSE to pause disc. The programmed selections will remain in memory.

7.To clear the programmed tracks. Press the STOP button.

NOTE: Channel 3 Volume Control controls Volume of CD Player.

INPUTS AND OUTPUTS:

MICROPHONE/INSTRUMENT INPUTS:

There are 3 types of input jacks on your TRAVEL AUDIO PRO, as follows: 2 – 1/8” phone jacks (3.5 mm)

2 – RCA jacks

3 – XLR or ¼” combination jacks (this jack will accept either type)

There are two types of microphones the TRAVEL AUDIO PRO is designed for: Dynamic - for standard dynamic cartridge microphones

Condenser - for electret or condenser microphones, which require phantom power (supplied from the amplifier)

There are three microphone channels (Channel 1, Channel 2, and Channel 3), and each channel has individual volume controls. Each channel will accept any of the listed