American DJ Color-Sphere instruction manual Introduction, General Operation

Page 2

COLOR-SPHERE™

General Instructions

Please carefully read and understand the instructions in this manual thoroughly before attempting to operate this unit. These instructions contain important safety information regarding the use and mainte- nance of this unit. Please keep this manual with the unit, for future ref- erence.

COLOR-SPHERE™Precautions

Keep the outside of this device dry at all times. Do not spill water or other liquids into or on to your unit. To prevent fire or shock hazard, do not expose this product to rain or moisture.

Be sure to save the packing carton in the event you may have to return the unit for service.

This unit is designed for interior use only. Do not use this unit out doors. Use of product outdoors will void the warranty.

Be sure that the local power outlet match that of the required volt- age for your unit.

Do not attempt to operate this unit if the power cord has been frayed or broken.

Always route your power cord out of the way of foot traffic.

Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire in the rare case of an internal short.

Disconnect the unit’s main power when left unused for long periods of time.

Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between this device and a wall.

Never block the ventilation holes.

Do not attempt to operate this unit, if it becomes damaged in any way.

Never operate this unit when it’s cover is removed.

This unit is for adult use only. Keep out of the reach of children.

COLOR-SPHERE™

Power Supply

Power Supply: Before plugging your unit in, be sure the source volt- age in your area matches the required voltage for your American DJ® COLOR-SPHERE™ before attempting operation.

COLOR-SPHERE™

Features

52 Vibrantly Colored Beams.

10 RPM Motor.

Easy Lamp Replacement.

Light Weight, Compact Case Design.

Built-In Mounting Plate.

Bright LL-200 or LL-200/2 (220v Version) / 200 Watt Lamp.

Low Power Consumption (about 2 amps).

COLOR-SPHERE™Operation

Introduction:

Thank you for purchasing the American DJ COLOR-SPHERE.To opti- mize the performance of this product, please read these operating instructions carefully to familiarize yourself with the basic operations of this unit. This unit is a smaller version of our Sunray 3.™ The COLOR- SPHERE™ is a multicolored rotating centerpiece effect. The unit spins at 10 RPM and emits 52 multi-colored beams of light. This unit is part of the StarTech® series and is designed for mobile DJ’s, bands, roller rinks or any arena that requires a compact light.

General Operation:

Simplicity! Just plug this light in, and watch it go. This fixture is designed to operate as a stand alone unit. It has been tested and the lamp has been installed at the factory there is no assembly necessary. The COLOR-SPHERE™ is ready to be plugged in, out of the box. There is no power switch, after plugging the unit the unit will slowly light up and rotate in a single direction. If there is no lamp output check the fuse and bulb. If the fuse and bulb are good, please return the unit for servicing.

COLOR-SPHERE™

Halogen Lamp Warning

This fixture is fitted with halogen lamps which are highly susceptible to damage if improperly handled. Never touch lamp with your bare fingers as the oil from your hands will shorten lamp life. Also, never move the fixture until the lamps have had ample time to cool. Remember, lamps are not covered under warranty conditions.

©American DJ Supply® - www.americandj.com - COLOR-SPHERE™ Instruction Manual Page 3

©American DJ Supply® - www.americandj.com - COLOR-SPHERE™ Instruction Manual Page 4

Image 2
Contents COLOR-SPHEREIntroduction Customer SupportCOLOR-SPHEREUnpacking Introduction General OperationFixture Cleaning Fuse ReplacementLamp Replacement Warranty DAY Limited Warranty