| Halogen Lamp Warning |
This fixture is fitted with halogen lamps which are highly susceptible to damage if improperly handled. Never touch the lamps with your bare fingers as the oil from your hands will shorten lamp life. Also, never move the fixture until the lamps have had ample time to cool. Remember, lamps are not covered under war- ranty conditions.
| Fuse & Lamp Replacement |
Caution: Always replace with the exact same type lamp and fuse, unless otherwise specified by an authorized American DJ® technician. Replace with anything other than the specified part can damage your unit and will void your manufactures warranty.
Warning: If, after replacing the lamp or fuse either one continues to blow, STOP using the unit. Contact customer support for further instructions, you may have to return the unit for servicing. Continuing to use the unit may cause serious damage.
Fuse Replacement: Disconnect the unit’s main power supply. Insert a standard flat head screw driver in to the fuse holder housing. Turn the screwdriver in
Lamp Replacement: Caution! Never attempt to change the lamp while the fixture is plugged in. Always disconnect the main power and allow the unit ample time to cool before attempting to replace the lamp. Lamp replacement has been made simple by incorporating the use of a
1. Be sure to follow the proper handling procedures that deal
Fuse & Lamp Replacement |
with halogen lamps. Never touch the new lamp with your bare fingers.
2.Remove the thumb screw on the rear of the unit’s head. This screw hold the lamp socket cover in place.
3.Pull back the cover once the screw has been removed to access the socket assembly.
4.Carefully remove the old lamp and discard it in the trash.
5.Replace the lamp with an exact match and reassemble.
Lamp Socket
Assembly
Thumb Screw
Lamp Cover
©American DJ® - www.americandj.com - | ©American DJ® - www.americandj.com - |