American DJ XP3 XP-3 Safety Precautions, XP-3 Features, XP-3 Product Registration

XP-3™ Safety Precautions

Safety Issues: This unit may blow a fuse if the maximum allotted load of 5 amps is reached. If the fuse needs replacement, always replace the fuse with same exact type that was remove, unless other- wise instructed by an authorized American DJ® service technician. Use of a different type fuse from that which is recommended may cause fire or electric shock and will void the manufactures warranty.

To reduce the risk of electrical shock or fi re, do not expose this unit rain or moisture

Do not spill water or other liquids into or on to your unit

Do not attempt to operate this unit if the power cord has been frayed or broken

Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fi re in case of an internal short

Disconnect from main power before making any type of connection

•Do not remove the cover under any conditions. There are no user serviceable parts inside

Never plug this unit in to a dimmer pack

Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between this device and a wall Do not attempt to operate this unit, if it becomes damaged

This unit is intended for indoor use only, use of this product outdoors voids all warranties

During long periods of non-use, disconnect the unit’s main power Always mount this unit in safe and stable matter

Power cords should be routed so they are not likely to be walked on, pinched by items placed upon or against them.

•Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See page 7 for cleaning details

Heat -The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

The fixture should be serviced by qualified service personnel when:

A.The power-supply cord or the plug has been damaged.

B.Objects have fallen, or liquid has been spilled into the appliance.

C.The appliance has been exposed to rain or water.

D.The fixture does not appear to operate normally or exhibits a marked change in performance.

©American DJ® - www.americandj.com - XP-3™ Instruction Manual Page 3

XP-3™ Features

•Micro-Stepping Motors for Smooth Transitions

•Uses Five DMX Channels

•DMX-512 Protocol Compatible

•Full Focusing

•Fan Cooled.

•17 Color/Gobo Combinations, Plus Spot Strobes in Every Color

Built-In Programs

Room Type Function for Built-In Programs 355˚ Pan / 240˚ Tilt

2 Color Strobe Function Digital Display Master/Slave Operation Linkable up to Four Units

Built-In Lamp Shut-Off Protection Internal Microphone

Volume Sensitivity Knob Built-In Rigging Point Easy Lamp Replacement

Long Life ZB-JCR H5 (15v/150w) Lamp - 500 Hours Optional MINI/C Blackout Controller

XP-3™ Product Registration

The XP-3™ carries a one year (365 days) limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return package. A brief description of the problem as well as the R.A. number must also be written down on a piece of paper and included in the shipping container. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. You may obtain a R.A. number by contacting our customer support team on our toll free customer support number at (800) 322-6337 . All packages returned to service not displaying a R.A. number on the outside of the package will be returned to the shipper.

©American DJ® - www.americandj.com - XP-3™ Instruction Manual Page 4