Fixture Cleaning, XP-3 Gobo Wheel Layout

XP-3™

Gobo Wheel Layout

GOBO 1

This chart details the gobo patterns as well as the gobo placement on the internal wheel. Gobo one is the large spot. The arrow indicates the wheel rotation.

XP-3™

Cleaning

Fixture Cleaning:

Due to fog residue, smoke, and dust cleaning the internal and external optical lenses and mirror should be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates (I.e. smoke, fog residue, dust, dew). In heavy club use we recommend cleaning on a monthly basis. Periodic cleaning will ensure longevity, and crisp output.

1.Use normal glass cleaner and a soft cloth to wipe down the outside

casing.

2.Use a brush to wipe down the cooling vents and fan grill.

3.Clean the external optics and mirror with glass cleaner and a soft cloth every 20 days.

4.Clean the internal optics with glass cleaner and a soft cloth every 30-60 days.

5.Always be sure to dry all parts completely before plugging the unit back in.

XP-3™

Trouble Shooting

Trouble Shooting:

Listed below are a few common problems that you may encounter, with solutions.

No light output from the unit;

1.Be sure you have connected your unit into a standard 120V wall outlet.

2.Be sure the external fuse has not blown. The fuse is located on the bottom panel of the unit.

3.Remove the lamp cover and be sure the lamp is seated in its socket properly. Occasionally lamps become loose during shipping be sure the lamp is push in to its socket all the way.

4.Be sure the fuse holder is completely and properly seated.

Unit does not respond to sound;

1.Low frequencies (bass) should cause the unit to react to sound. Tapping on the microphone, quiet or high pitched sounds may not activate the unit.

2.Be sure the SENSITIVITY KNOB (5) is not set to the minimum position