Lens, XLR Output Jack, XLR Input Jack | American DJ XP3 manual

XP-3™

Controls and Functions

TOP

1	7
	8

	2
	3
	4	9
	5	10
	6	10
	6

BOTTOM

XP-3™

Controls and Functions

1.Lens -

This is a fully focusing high quality lens. Focus the lens by manually turning the lens in a clockwise or counter-clockwise direction until the image is in focus.

2.XLR Output Jack -

This jack is used to transmit the incoming DMX signal to another DMX fi xture, or transmit a Master/Slave signal to the nest XP-3™ in the chain. For best results in DMX or Master/Slave mode, terminate this jack if it is the last unit in the chain. See “Terminator” on page 7.

3.XLR Input Jack -

This jack is used to accept an incoming DMX signal (from a universal DMX controller) or Master/Slave (from the output jack of another XP-3™) signal.

4.MINI/C Controller Jack

This jack is for use with the optional MINI/C Blackout controller only. See page 7 for details on the MINI/C controller. Do not attempt to con- nect an audio signal this jack, this will damage the PC board and void your manufactures warranty!

5.Power Cord Connection -

The power connection uses an I.E.C. type connector, use only a power cord that matches this type of connection. Be sure to only connect this unit to a power outlet that matches the printed power label on the unit. Never use a power when the ground prong has been removed or broken off. The ground prong is used to reduce the risk of electrical shock in case of an electrical short. .

6.Fuse Holder -

This housing stores the 5 amp GMA protective fuse. Always

replace with the exact same type fuse, unless other wiseinstructed,by an authorized American DJ® service technician.

7.Lamp Socket Cover Thumb Screw -

This thumb screw holds the lamp socket assembly cover (16) into place.

8.Lamp Socket Cover -

This thumb screw holds the lamp socket cover (16) into place.