Dynacord PowerMate 1600 owner manual Maximum amount of speakers in a passive configuration

Page 27

MASTER PATCHBAY AND DIFFERENT SETUP ALTERNATIVES

3. Maximum amount of speakers in a passive configuration:

The PowerMate allows the maximal connection of three loudspeaker cabinets with an impedance of 8 ohms per power amp output channel. In other words: the internal power amplifier is capable of driving a maximum of six 8 ohms speaker systems. The following diagram shows an example of how to set up your PowerMate for operation with the maximum amount of speakers connected.

Usual power mixer applications do not include a monitor amps rack. Thus, active monitor systems, like the DYNACORD AM12 for example represent a convenient alternative.

4. Active 2-way stereo configuration:

This example uses the internal power amplifier of the PowerMate to drive the Hi/Mid cabinets. The full-range signal is fed via MAIN OUTPUTS or EQ OUTPUTS to an active crossover. The Lo-signal outputs of the x-over are connected to an external power amplifier, driving the woofer cabinets. The signal of the x-over’s Hi-signal outputs is fed back to the PowerMate’s internal power amplifier via POWER AMP INPUTS. Compared to the passive configuration, the overall sound gains transparency and higher sound pressure levels are possible, since the Hi/ Mid cabinets do not have to deal with the low frequency signals.

55

Image 27
Contents PowerMate 1000/1600 Contents Safety Component Must be Replaced by Original Part Description Installation and ConnectionsInput Mono MICLine Setting Instructions InsertGain Page AUX / FX 1/2 MID EQMute Signal / Peak IndicatorVolume PANGain MIC Input Stereo15.MIC Stereo Input L/MONO REQ Section Line TrimAUX /FX AUX3/4 BAL SIGNAL/PEAKFX1/FX2 Effekt 1/2FX Start Programs Changing FX Start ProgramsEffekt Return Display30. UP/DOWN Peak LEDAUX3/4 Send AUX3/4 PostFeedback Filter Band Equalizer AUX3/4 VolumeStatus Indicators MasterMaster L + R Master LED-DISPLAYStandby PFL MasterRecord Send L/R Mono OutputMono OUT PhonesEQ Inputs / Outputs Power AMP InputsMain Inserts Main OutputsLamp XLR FootswitchPower Rear PanelSpeaker Outputs Right / Left LF-Cables Balanced or Unbalanced? Setting UP a Standard PA-SYSTEMCabling Speaker CablesSetting Up Sound Check Monitor Mix Main MixMaster Patchbay and Different Setup Alternatives Connection of an external power amplifierUsing the internal power amplifier for monitoring purposes Active 2-way stereo configuration Maximum amount of speakers in a passive configurationSpecifications Block Diagram ABMESSUNGEN/DIMENSIONS Page USA