Dynacord PowerMate 1600 owner manual Specifications

Page 28

SPECIFICATIONS

Technical Specifications PowerMate1000/PowerMate1600 Mixing desk in rated condition, Unity Gain ( MIC

Gain 20 dB ), all faders position 0 dB, all pots in mid position, master fader + 6dB, amplifier rated output power into

8 ohms, dual channel, unless otherwise specified.

Maximum Midband Output Power, 1 kHz, THD=1%

into 2.66 Ohms into 4 Ohms into 8 Ohms

Rated Output Power, THD=0.1%, Single Channel into 4 Ohms

into 8 Ohms

Maximum Output Voltage of power amplifier, no load THD at 1kHz, MBW=80kHz

MIC input to Main L/R output, +16 dBu, typical Power amplifier input to Speaker L/R output DIM 30, power amplifier

IMD-SMPTE, power amplifier, 60Hz, 7 kHz

Frequency Response, -3dB ref. 1kHz

Any input to any Mixer output

Any input to Speaker L/R output

Crosstalk, 1kHz

Fader and AUX-Send attenuation Channel to channel

CMRR, MIC input, 1kHz

Input Sensitivity, all level controls in max. position MIC input

LINE Input (Mono)

LINE Input (Stereo)

Power Amplifier Input Maximum Level, mixing desk MIC inputs

Mono Line inputs Stereo Line inputs All other inputs Record Send output All other outputs

Input Impedances

MIC

Insert Return

EQ Input and 2 Track Return

All other inputs

Output Impedances

Record Send

Phones

All other outputs

Equivalent Input Noise, MIC Input, A-weighted, 150 ohms Noise, Channel inputs to Main L/R outputs, A-weighted Master fader down

Master fader 0 dB, Channel fader down

Master fader 0 dB, Channel fader 0 dB, Channel gain unity Signal/Noise-Ratio, power amplifier, A-weighted

Equalization

LO Shelving

MID Peaking, mono inputs MID Peaking, stereo inputs HI Shelving

Master EQ, 2x7-band, 63, 125, 400, 1k, 2k5, 6k, 12k Hz Power Consumption at 1/8 maximum output power, 4 ohms Dimensions, (WxHxD), mm

2 x 870 W

2 x 700 W

2 x 430 W

2 x 700 W

2 x 350 W

70 Vrms

<0.005% < 0.01% < 0.01% < 0.01%

15Hz ... 80kHz 20Hz ... 70kHz

>85 dB

>80 dB

>80 dB

-74 dBu (155 µV) -54 dBu (1.55 mV) -34 dBu (15.5 mV)

+6 dBu (1.55 V)

+21 dBu

+41 dBu

+30 dBu

+22 dBu

+14 dBu

+22 dBu

2 k ohms

2.2k ohms 8 k ohms

>15 k ohms

1 k ohms

 

47 ohms

 

75 ohms

 

-130 dBu

 

PM1000

PM1600

-95 dBu

-95 dBu

-90 dBu

-88 dBu

-83 dBu

-82 dBu

105dB

±15 dB / 60 Hz

±15 dB / 100 Hz ... 8 kHz

±12 dB / 2.4 kHz

±15 dB / 12 kHz

±10 dB / Q=2.0

640 W

PowerMate1000

514.5 x 210.3 x 478.7

PowerMate1600

673.5 x 210.3 x 478.7

Weight, without lid / including lid

 

PowerMate1000

20 kg / 21 kg

PowerMate1600

23.5 kg / 25 kg

Optional

 

RMK-1000 (Rack-Mount-Kit PowerMate1000-2)

112 698

Gooseneck Lamp, 12V/2.4W, 12“, XLR

112 700

FS11 (Footswitch)

110 693

56

Image 28
Contents PowerMate 1000/1600 Contents Safety Component Must be Replaced by Original Part Installation and Connections DescriptionMIC Input MonoLine Insert Setting InstructionsGain Page MID EQ AUX / FX 1/2Signal / Peak Indicator VolumePAN MuteInput Stereo 15.MICStereo Input L/MONO R Gain MICLine Trim EQ SectionSIGNAL/PEAK AUX /FX AUX3/4 BALEffekt 1/2 FX Start ProgramsChanging FX Start Programs FX1/FX2Display 30. UP/DOWNPeak LED Effekt ReturnAUX3/4 Post AUX3/4 SendFeedback Filter AUX3/4 Volume Status IndicatorsMaster Band EqualizerMaster LED-DISPLAY StandbyPFL Master Master L + RMono Output Mono OUTPhones Record Send L/RPower AMP Inputs Main InsertsMain Outputs EQ Inputs / OutputsFootswitch Lamp XLRRear Panel PowerSpeaker Outputs Right / Left Setting UP a Standard PA-SYSTEM CablingSpeaker Cables LF-Cables Balanced or Unbalanced?Setting Up Sound Check Main Mix Monitor MixConnection of an external power amplifier Master Patchbay and Different Setup AlternativesUsing the internal power amplifier for monitoring purposes Maximum amount of speakers in a passive configuration Active 2-way stereo configurationSpecifications Block Diagram ABMESSUNGEN/DIMENSIONS Page USA