Dynacord 1000 owner manual AUX/FX Send, FX on, Peak LED, Effect Return

Page 13

EFFECT 1/2

29. AUX/FX SEND

These rotary controls could also be defined as FX SEND master controls, since they are used to adjust the overall level of the effect mix that you have established using the channel FX send controls. The AUX/FX SEND controls are used to set the input levels of the corresponding FX unit, respectively the levels of the AUX SEND outputs. Whenever the Peak LED (PK) blinks, there is the potential risk that the FX input signal is driven into clipping, making it necessary to reduce its level by turning the corresponding AUX/FX SEND control to the left, until the LED is not lit anymore. Since the AUX/FX SEND controls not only affect the signals of the FX buses but also the monitor effect level, which is set by the FX to AUX3 control, careless changes can result in acoustical feedback.

30. FX ON

These switches are used to turn the internal FX units on – the green LED is lit. Please keep in mind that you also can use an external foot switch to turn the FX units on. In this case the LED also shows the actual state of operation. If you want to use a foot switch, the FX ON switch has to be engaged first. The corresponding FX unit is activated and you can use the foot switch to turn the selected effect program on or off.

31. PEAK LED

These indicators signal if the input stages of the internal FX units or the AUX 1/" SEND signals are driven into clipping. To achieve an adequate S/N ratio, please adjust the FX units’ input level as follows:

Note on how to adjust the FX input signal:

1.Establish a “dry” mix – without effect settings – according to the previous descrip- tions.

2.Set the AUX/FX send controls of the effect channels to their center position.

3.Position the effect return faders of the effect channels at the –5dB marks. 4.Use the UP/DOWN buttons to select the desired FX program preset. 5.Press the FX ON switch.

6.Play the sound source of the desired input channel and adjust the desired amount of the FX signal, using the AUX/FX controls of this input channel. Repeat this step for all input channels that you want to include in your effect mix. 7.Adjust the AUX/FX SEND controls, so that the Peak LED only lights frequently at highly dynamic signal peaks.

8.Use the FX to AUX3 control to add the effect mix to the monitor mix. Use the FX return faders to add the desired amount of the FX signal to the main mix.

In case you are using a different effect setting for the second FX unit, you have to repeat the step 2 - 8, respectively. Pay some attention to the peak indicators when operating your PowerMate to quickly interact when the signal levels exceed the normal range and enter clipping.

32. EFFECT RETURN

These stereo faders are used to determine the effect amount of the main mix. In case you have to set these faders at a position above the +5dB mark, please check if the FX units input signals are adjusted properly. Otherwise use the AUX/FX SEND controls to increase the input levels.

41

Page 12 Page 14
Image 13
Page 12 Page 14
Contents W e r M ate 1000/1600/2200 For US and Canada only Safety Component has to be Replaced with Original Part onlyInstallation and Connections Unpacking and WarrantyT R O D U C T I O N Line MICGain InsertLO CUT 80 Hz EQ Section Voicing FilterLOW-HI EQ MID EQ AUX AUX/FXVolume Signal present / Peak indicatorPAN PFLGain MIC Stereo Input L/MONO RLine Trim AUX/FX AUX3 BAL SIGNAL/PEAKFX1/FX2 Effect 1/2Display FX on AUX/FX SendPeak LED Effect ReturnAUX AUX3 VolumeAUX3 Send Feedback FilterPhones + Mono OUT + Stand by Stereo Returns S T E RStereo Return Record Send L/RMain Inserts Power AMP InputsMain Outputs EQ Inputs / OutputsPhantom Power Power AMP Status indicatorsMaster LED-DISPLAY Band EqualizerPFL Master Power AmplifierMaster L + R Rear Panel PowerSpeaker Outputs Right / Left Cabling Standard InstallationSpeaker Cables LF-CABLES Balanced or UNBALANCED?Setting up Sound Check Main MIX Connecting an external power amplifier Master Patchbay and Installation AlternativesConnecting an additional mixing console Monaural sound reinforcement with monitoring Active stereo 2-way configuration Maximum amount of speakers in a passive configurationPeci F I C a T IO N S Block Diagram M E S S U N G E N / D I M E N S I O N S Garantie

1000 specifications

The Dynacord 1000 series stands as a beacon of excellence in the realm of professional audio systems. Renowned for its reliability and superior sound quality, this series is crafted for a variety of applications, from live performances to installations in concert halls and auditoriums.

One of the standout features of the Dynacord 1000 is its power amplification technology. The series incorporates Class-D amplifier technology, which allows for high efficiency and reduced weight compared to traditional amplifiers. This results in a compact design without compromising the audio output. Users can expect impressive power levels that are capable of driving large speaker systems with ease, providing clear sound even at high volumes.

The Dynacord 1000 series also boasts an advanced digital signal processing (DSP) platform. This powerful DSP engine includes a variety of built-in effects and advanced equalization options, allowing sound engineers to finely tune their audio output. This versatility makes it suitable for diverse applications, from smooth music playback to complex multi-channel live mixing scenarios.

A key characteristic of the Dynacord 1000 is its user-friendly interface. The intuitive layout of controls allows for quick adjustments and easy navigation through various settings. This is particularly advantageous for live sound situations, where time is often limited and quick responses are critical.

Durability is another critical aspect of the Dynacord 1000 series. The rugged build quality ensures that the system can withstand the rigors of both touring and permanent installation environments. Additionally, the units are designed with thermal management features, which prevent overheating during long usage periods, ensuring longevity and reliability.

The Dynacord 1000 series is also highly compatible with various accessories and additional equipment. Its flexible connectivity options, including analog and digital inputs, ensure seamless integration with other sound systems and devices. This adaptability is essential for professionals seeking a comprehensive audio solution.

In summary, the Dynacord 1000 series stands out as a top-tier choice for audio professionals, boasting powerful amplification, advanced DSP capabilities, user-friendly controls, and robust construction. It meets the demanding needs of modern sound production, making it an essential component for any serious audio setup.
Top Page Image Contents