Setting up

STANDARD INSTALLATION

In this chapter we would like to explain to you how to install a typical sound reinforcement system in passive configuration and incorporating stage monitor speakers. The necessary equipment is:

1 PowerMate 1000

1Power amplifier for the monitor signal – for i. e. 2x250 watts

2HI cabinets – i. e. 3-way 12" speakers

2 LO cabinets – i. e. 15" woofer

2Speaker pole-stands or 2 connection rods

2Stage monitor speakers

4SPEAKON cables (8m), and 2 SPEAKON cables (2m)

1Balanced LF-cable with a stereo phone plug on one side and an XLR-type connector on the other side

∙Place the PowerMate and the external power amplifier in a way that allows their unobstructed operation during the sound check and the later performance.

∙Try to locate the best position where you want to place the loudspeaker systems. If possible, the woofers should be placed on the floor while the Hi cabinets’ most favorable position is above the Lo cabinets, on the same vertical axis. It is important that the lower edge of the Hi cabinets is approximately at the same height level as the heads of the audience. Either you use the interconnection rods to mount the Hi cabinets on top of the woofers or, in case this kind of installation is not possible in your application, you have to use the separate speaker pole-stands.

∙Do not place the left and the right speakers further apart than necessary. The less distance there is between the two speaker “clusters” – the more compact the sound.

∙Try to avoid the positioning of the main loudspeakers behind the imaginary line of microphones. Otherwise, if

you have to drive the system at higher sound levels, the risk of feedback is very likely.

∙After you have installed all microphone stands and all artist found a seat on the stage, the best place to install the monitor speakers is up front facing the musicians. Nevertheless, please check if a mic rophone is directly pointing in the direction of a monitor. In this case, change its position. You should also be aware of the individual characteristics of the used microphones.

∙Make all connections according to the diagram above. Use the different SPEAKON cables to connect the speaker systems to the PowerMate’s power outputs, respectively to the power outputs of the exte rnal amplifier. Make sure not to confuse the channels by accident. using the short SPEAKON cables, you can conne ct the Hi cabinets at the woofers’ outputs. The two monitor speakers are connected to either one output of th e additional external amplifier. The amplifier should be set to coupled operation, so that the inputs are configured to accept a monaural audio signal. The amplifier’s volume controls provide the possibility to adjust the output levels separately.

1000 specifications

The Dynacord 1000 series stands as a beacon of excellence in the realm of professional audio systems. Renowned for its reliability and superior sound quality, this series is crafted for a variety of applications, from live performances to installations in concert halls and auditoriums.

One of the standout features of the Dynacord 1000 is its power amplification technology. The series incorporates Class-D amplifier technology, which allows for high efficiency and reduced weight compared to traditional amplifiers. This results in a compact design without compromising the audio output. Users can expect impressive power levels that are capable of driving large speaker systems with ease, providing clear sound even at high volumes.

The Dynacord 1000 series also boasts an advanced digital signal processing (DSP) platform. This powerful DSP engine includes a variety of built-in effects and advanced equalization options, allowing sound engineers to finely tune their audio output. This versatility makes it suitable for diverse applications, from smooth music playback to complex multi-channel live mixing scenarios.

A key characteristic of the Dynacord 1000 is its user-friendly interface. The intuitive layout of controls allows for quick adjustments and easy navigation through various settings. This is particularly advantageous for live sound situations, where time is often limited and quick responses are critical.

Durability is another critical aspect of the Dynacord 1000 series. The rugged build quality ensures that the system can withstand the rigors of both touring and permanent installation environments. Additionally, the units are designed with thermal management features, which prevent overheating during long usage periods, ensuring longevity and reliability.

The Dynacord 1000 series is also highly compatible with various accessories and additional equipment. Its flexible connectivity options, including analog and digital inputs, ensure seamless integration with other sound systems and devices. This adaptability is essential for professionals seeking a comprehensive audio solution.

In summary, the Dynacord 1000 series stands out as a top-tier choice for audio professionals, boasting powerful amplification, advanced DSP capabilities, user-friendly controls, and robust construction. It meets the demanding needs of modern sound production, making it an essential component for any serious audio setup.