Standard Installation, Cabling, Speaker Cables

STANDARD INSTALLATION

CABLING

The mains supply cord comes with the PowerMate. The quality of all other cables lies in your responsibility. Carefully chosen high quality cables are the best precaution to prevent later problems during live operation. The following wiring alternatives are recommended to provide a trouble free operation of your setup.

SPEAKER CABLES

From our experience as a manufacturer of loudspeaker systems we learned that flexible cables with a rubber jacket and a diameter of 2.5mm2 per conductor, used in combination with SPEAKON plugs and sockets, are the best choice to guarantee the optimal connection of loudspeaker systems. In accordance to the corresponding diagram, the SPEAKON plugs are connected on the PowerMate’s rear panel. We recommend the use 4-wire cables where also the pins 2+ and 2- are connected through. This provides you with the possibility to use these cables in an active 2-way system configuration, as well. DYNACORD speaker cables with SPEAKON connectors and all other cables, plugs, and sockets are available at your professional audio dealer.

LF-CABLES – BALANCED OR UNBALANCED?

For LF-cabling – all the low current wiring – your best choice are balanced cables (2 signal conductors + ground shielding) with XLR-type connectors or stereo phone jacks and plugs. The cables should be step proof, shielded, and never longer than really needed. Too many too long cables mostly lead to confusion and generate unnecessary problems.

Of course, you can also connect unbalanced cables with monaural phone plugs to the PowerMate’s in- and outputs and because of its superb grounding managing system in most cases no interference will occur. Still, there is a minimal risk that problems could arise and we believe that this is reason enough to keep on reading. Generally spoken, if you have the choice, a balanced LF-cable is always the better solution. Today’s modern audio equipment – like amplifiers, equalizers, FX units, mixing consoles, and even some keyboards – offers balanced in- and outputs. In a balanced signal path the cable screen provides the gapless connection of all metal parts, offering efficient shielding against the induction of external noise. The balanced cabling in conjunction with the common-mode rejection of the PowerMate’s input stage effectively eliminates even existing artifacts of interference. All inputs of the PowerMate provide balanced audio connections and high common-mode rejection. The mixing stage outputs – AUX, MAIN, EQ, etc. – are laid out in GND-SENSING technology – a special pin assignment of the output jacks, offering all advantages of the balanced signal transmission, but lets you also connect monaural phone plugs without a problem. Nevertheless

–as mentioned above – when longer cables are involved, using stereo phone plugs and balanced cables are the better alternative. The diagrams below show the pin assignments of plugs and cables that are used with the PowerMate.

MIC INPUT

All phone jack in/out- puts of the Power- Mate

Channel Insert

Main Insert

All phone jack in/outputs of the PowerMate

Channel Insert

Main Insert

balanced connecti- on of microphones

unbalanced

external equipment with XLR-type in/out- put jacks balanced

Direct OUT via INSERT, uninterrupted signal path

unbalanced

external equipment with XLR-type in/out- put jacks

balanced

Y-type cable for the connection of external FX units and signal processors with phone jacks

1000 specifications

The Dynacord 1000 series stands as a beacon of excellence in the realm of professional audio systems. Renowned for its reliability and superior sound quality, this series is crafted for a variety of applications, from live performances to installations in concert halls and auditoriums.

One of the standout features of the Dynacord 1000 is its power amplification technology. The series incorporates Class-D amplifier technology, which allows for high efficiency and reduced weight compared to traditional amplifiers. This results in a compact design without compromising the audio output. Users can expect impressive power levels that are capable of driving large speaker systems with ease, providing clear sound even at high volumes.

The Dynacord 1000 series also boasts an advanced digital signal processing (DSP) platform. This powerful DSP engine includes a variety of built-in effects and advanced equalization options, allowing sound engineers to finely tune their audio output. This versatility makes it suitable for diverse applications, from smooth music playback to complex multi-channel live mixing scenarios.

A key characteristic of the Dynacord 1000 is its user-friendly interface. The intuitive layout of controls allows for quick adjustments and easy navigation through various settings. This is particularly advantageous for live sound situations, where time is often limited and quick responses are critical.

Durability is another critical aspect of the Dynacord 1000 series. The rugged build quality ensures that the system can withstand the rigors of both touring and permanent installation environments. Additionally, the units are designed with thermal management features, which prevent overheating during long usage periods, ensuring longevity and reliability.

The Dynacord 1000 series is also highly compatible with various accessories and additional equipment. Its flexible connectivity options, including analog and digital inputs, ensure seamless integration with other sound systems and devices. This adaptability is essential for professionals seeking a comprehensive audio solution.

In summary, the Dynacord 1000 series stands out as a top-tier choice for audio professionals, boasting powerful amplification, advanced DSP capabilities, user-friendly controls, and robust construction. It meets the demanding needs of modern sound production, making it an essential component for any serious audio setup.