Chauvet CUBIX user manual Product at a Glance, Safety Notes

Page 4

Product at a Glance

Use on Dimmer

Outdoor Use

Sound Activated

DMX

Master/Slave

Safety Notes

Auto Programs

 

 

Auto-ranging Power Supply

 

 

Replaceable Fuse

 

 

User Serviceable

Duty Cycle

Please read the following notes carefully because they include important safety information about the installation, usage, and maintenance of this product.

∙Keep this User Manual for future consultation. If you sell this product to another user, be sure that they also receive this document.

∙Always make sure that the voltage of the outlet to which you are connecting this product is within the range stated on the decal or rear panel of the fixture.

∙This product is for indoor use only! To prevent risk of fire or shock, do not expose this fixture to rain or moisture.

∙Make sure there are no flammable materials close to the unit while operating.

∙Always install this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.

∙Be sure that no ventilation slots on the unit’s housing are blocked.

∙Always disconnect this product from the power source before cleaning it or replacing the fuse.

∙Make sure to replace the fuse with another of the same type and rating.

∙If mounting this product overhead, always secure it to a fastening device using a safety cable.

∙The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate this product at higher temperatures.

∙In the event of a serious operating problem, stop using the unit immediately.

∙Never try to repair this product. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center.

∙Never connect this product to a dimmer pack.

∙Make sure the power cord is not crimped or damaged.

∙Never disconnect the power cord by pulling or tugging on the cord.

∙Never carry a fixture from the power cord or any moving part. Always use the hanging/mounting bracket or the handles.

∙Always avoid direct eye exposure to the light source when this fixture is on.

Page 4 of 18

Cubix™ User Manual (Rev. 01a)

Image 4
Contents Page Table of Contents Before YOU Begin Safety Notes Product at a GlanceIntroduction AC Power SetupPower Linking Orientation MountingRigging Operation Control Panel Operation Configuration DMXStarting Address Configuration Standalone Modes Sound Active ModeAutomatic Mode Manual ModeSlave units Master/Slave ModeMaster unit Channel Function Value Setting Operating modeDMX Channel Assignments and Values StrobeGeneral Maintenance Technical InformationGeneral Troubleshooting Symptom Possible Cause Possible ActionReturns Procedure ClaimsContact Information World Headquarters United Kingdom & IrelandDMX Primer Fixture Linking Daisy ChainMale Plug DMX CablingFemale Plug DIP Switch Reference Guide DIP Switches = Off =Off DMX AddressTechnical Specifications